Merge branch 'master' into cray-next

10 lat temu · eeaeaefe0a
--- a/+ 4
+++ b/+ 4
@@ -6,22 +6,15 @@ LAST:=$(shell cat .last || echo 0)
 NEXT:=$(shell l=$(LAST); ((l=l+1)); echo $$l)
 NEXTGEN:=$(PWD)/generation/$(NEXT)
 LASTGEN:=$(PWD)/generation/$(LAST)
 TANGLERS:=readme.org emacs.org
 TANGLERS:=$(shell ls -d *.org)
 GEN:=$(LAST)
 OPTIONS:=
 all: clean tangle-next
 tmp:
 	install -dm755 $@
 INSTALLDIRS=tmp $(NEXTGEN) $(LASTGEN) generation/$(GEN)
 $(NEXTGEN):
 	install -dm755 $@
 $(LASTGEN):
 	install -dm755 $@
 all: clean tangle-next
 generation/$(GEN):
 $(INSTALLDIRS):
 	install -dm755 $@
 generation: $(NEXTGEN) $(LASTGEN) tmp
--- a/bin.org
+++ b/bin.org
@@ -0,0 +1,1042 @@
 #+TITLE: ~/bin files
 #+AUTHOR: Mitch Tishmack
 #+STARTUP: hidestars
 #+STARTUP: odd
 #+BABEL: :cache yes
 #+PROPERTY: header-args :cache yes :padline no :mkdirp yes :comments no
 ~/bin files and other shenanigans
 * ~/bin/cidr
 A stupid script I wrote ages ago to help me be lazy with cidr
 notation for stuff. Setup the wrong netmask a few times and
 you too, will wish for something similar.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/cidr :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Convert input ip/cidr|netmask|hexnetmask to useable network information.
 #
 use strict;
 use warnings;
 use Socket;
 use Sys::Hostname;
 #
 # Globalish vars
 #
 $ENV{PATH} = '/usr/bin:/bin:/usr/sbin:/sbin'; # Paranoia, know thy name!
 my ($fqdn_regexp) = qr/([0-9,a-z,A-Z,\-,\_]+)\.([0-9,a-z,A-Z,\-,\_]+)\.(com|gov)/;
 #
 # converts a 1-word (4 byte) signed or unsigned integer into a dotted decimal
 # ip address.
 #
 sub int2ip {
  my $n=int(pop);
  return(sprintf("%d.%d.%d.%d", ($n>>24)&0xff,($n>>16)&0xff,
    ($n>>8)&0xff,$n&0xff));
 };
 #
 # Convert a host/ip/netmask/cidr/etc.... to a hash of information
 # Example: host.domain.tld/24 will get the ip and calculate the netmask info
 #  equally if host.domain.tld corresponds with 1.2.3.4 the following is valid
 #  1.2.3.4/255.255.255.0 would obtain the same information.
 #
 # die()'s if anything isn't kosher.
 #
 # Ultra long function, probably needs to be looked at for condensing/splitting.
 #
 sub cidr2raw {
  my $rawinput = pop;
  my ($lhs, $rhs, $j, $uip) = (undef, undef, undef, undef);
  my ($ucidr) = 0;
  my ($network, $bits, $netmask, $broadcast, $low, $high);
  if ($rawinput =~ qr/(.*)\/(.*)/){
      $lhs = $1; $rhs = $2;
  }else{
    die "Input: $rawinput not expected.\n";
  };
  #
  # Handle ip/hostname for left hand side.
  if ($lhs =~ qr/(\d+)\.(\d+)\.(\d+)\.(\d+)/){
    foreach my $dotted (($1,$2,$3,$4)){
      if (($dotted > 255) or ($dotted < 0)){
        die "FATAL: ipv4 address entered, $lhs entered is impossible, $dotted is not between 0-255.\n";
      };
    };
    $uip = inet_ntoa(scalar gethostbyname($lhs));
    die "FATAL: Cannot determine hostname for $lhs$!\n" if (!defined($lhs));
  }elsif ($lhs =~ $fqdn_regexp){
    my $tmp = gethostbyname($lhs);
    die "FATAL: Cannot determine ip for $lhs" if (!defined($tmp));
    $uip = inet_ntoa($tmp);
  }else{
    die "FATAL: host value not fully qualified, or not an ip <$lhs>\n";
  };
  #
  # Handle the netmask/cidr for the right hand side,
  #
  # All input netmasks are converted to a cidr address for notation
  if ($rhs =~ qr/^(\d+)$/){ # /cidr
    $ucidr = $1;
    die "FATAL: Invalid CIDR <$ucidr>.$!\n" if (($ucidr > 32) or ($ucidr < 0));
  }elsif ($rhs =~ qr/(0[xX])?([0-9,a-f,A-F]{7})/){ # /0xhexnetmask
    my $trimmed = $2;
    my $insane = 0;
    foreach my $byte (split('', unpack("B32", pack("H*", $trimmed)))){
      ($byte) ? $ucidr++ : $insane++;
      die "FATAL: $rhs is not a valid hex netmask.$!\n" if ($insane and $byte);
    };
  }elsif ($rhs =~ qr/(\d+)\.(\d+)\.(\d+)\.(\d+)/){ # /255.255.255.0 form
    my @a = ($1, $2, $3, $4);
    my $insane = 0;
    foreach my $t (@a){
      die "FATAL: Netmask out of range. Input <$rhs> Invalid <$t>$!\n" if (($t < 0) or ($t > 255));
    };
    foreach my $byte (split('', unpack("B32", pack("C4", @a)))){
      ($byte) ? $ucidr++ : $insane++;
      die "FATAL: $rhs is not a valid netmask.$!\n" if ($insane and $byte);
    };
  }else{
    die "FATAL: Unknown or invalid netmask value entered. <$rhs>\n";
  };
  #
  # Network math GO! This is the meat of the function.
  my (@uip) = split(/\./, $uip);
  $network = 0;
  for ($j = 0; $j <= $#uip; $j++){
    $network += int($uip[$j])<<((3-$j)*8);
  };
  $bits = 0; $j = 0;
  for ($j = 31 - $ucidr; $j >= 0; $j--){
    $bits |= 1<<$j;
  };
  $netmask = 0xffffffff^$bits;
  $low = ($network&$netmask);
  $high = ($network&$netmask)+$bits-1;
  $broadcast = ($network&$netmask)|$bits;
  my ($guessed_hostname,undef,undef,undef,undef) = gethostbyaddr(inet_aton($uip), AF_INET);
  #
  # Throw the info back, they get a hash with zie info they may/may not need.
  # All up to the caller what they want to use.
  #
  return ("inet4" => $uip,
          "netmask" => int2ip($netmask),
          "broadcast" => int2ip($broadcast),
          "cidr" => $ucidr,
          "router" => int2ip($low+1),
          "network" => int2ip($low),
          "high" => int2ip($high),
          "hostname" => $guessed_hostname,
          );
 };
 #package Main; # future use
 foreach my $arg (@ARGV){
  my %stuff = cidr2raw($arg);
  printf("%s/%s is %s/%s\n%-12s\t%s\n%-12s\t%s\n%-12s\t%s\n%-12s\t%s\n%-12s\t%s\n",
             $stuff{"inet4"},$stuff{"cidr"},
             $stuff{"network"},$stuff{"cidr"},
             "Netmask",$stuff{"netmask"},
             "Broadcast",$stuff{"broadcast"},
             "Network",$stuff{"network"},
             "Router",$stuff{"router"},
             "HighUsable",$stuff{"high"},
      );
 };
 #+END_SRC
 * ~/bin/dns
 Just a silly dns script that slighly mimics the old host utility
 of yore. Can also do reverse lookups.
 Example:
 $ dns google.com
 google.com is 216.58.216.206
 google.com is also google.com
 $ dns 216.58.216.206
 ord31s21-in-f206.1e100.net is 216.58.216.206
 ord31s21-in-f206.1e100.net is also ord31s21-in-f206.1e100.net
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/dns :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Stupid script to help with dns information. Solaris 9/8 lack the host utility.
 # Which this (kinda) mimics, except the mx record crap
 use strict;
 use warnings;
 use Socket;
 use Sys::Hostname;
 my $input = shift || hostname();
 my $lookup = $input;
 if ( $lookup =~ /\d+[.]\d+[.]\d+[.]\d+/smx ) {
  $lookup = ( gethostbyaddr inet_aton($lookup), AF_INET )[0];
  die "Error: Unable to reverse lookup ip $input.\n" if ( $lookup eq q{} );
 }
 my $ipv4 = gethostbyname $lookup;
 die "Error: $lookup doesn't have any known ip addresses\n"
  if ( !defined $ipv4 );
 $ipv4 = inet_ntoa($ipv4);
 my ( $short_name, $aliases, $addrtype, $len, @addrs ) = gethostbyname $lookup;
 foreach my $ipv4 (@addrs) {
  $ipv4 = inet_ntoa($ipv4);
  print "$lookup is $ipv4\n";
 }
 print "$lookup is also $short_name\n";
 if ( defined $aliases and "$aliases" ne q{} ) {
  print "aliases are ($aliases)\n";
 }
 exit 0;
 #+END_SRC
 * ~/bin/ts
 Stupid simple timestamp script that just takes input, and prefixes a timestamp to to output. Thats it.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/ts :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Timestamp stdin and then print to stdout and flush.
 #
 # Thats about it. Might add a quick and dirty option to allow you to
 # specify the time output whatnot. But this is intended to be simple.
 use strict;
 use warnings;
 use POSIX qw(strftime);
 use IO::Handle;
 STDOUT->autoflush(1);
 while(<STDIN>){
  my $now       = time;
  my $tz        = strftime(('%z', (localtime $now)));
  $tz =~ s/(\d{2})(\d{2})/$1:$2/smx;
  my $time = strftime('%Y-%m-%dT%H:%M:%S', (localtime $now));
  print "$time$tz ".$_;
 };
 #+END_SRC
 * ~/bin/diskhog
 Old script I wrote after I had to figure out where space was used and it was mostly all in a directory with a ton of small files.
 Written in anger. Not all that useful nominally.
 Defaults to /tmp if you don't specify where, also defaults to the top 10 offenders/users of space.
 Its not particuarly bright, or even good code. If you want ALL THE THINGS, pass -n -1 in and you will get a ton of output. Good luck with that.
 Example:
 $ diskhog
 1.79m    /private/tmp
 1.38m    /private/tmp/wifi-Ea5Y9F.log
 420.57k  /private/tmp/sysp.xml
 161.17k  /private/tmp/KSOutOfProcessFetcher.12572.ppfIhqX0vjaTSb8AJYobDV7Cu68=/ksfetch
 161.17k  /private/tmp/KSOutOfProcessFetcher.12572.ppfIhqX0vjaTSb8AJYobDV7Cu68=
 0.00k    /private/tmp/com.apple.launchd.yaVsd6J1re
 0.00k    /private/tmp/cvcd
 0.00k    /private/tmp/com.apple.launchd.IPS1lPqGTD
 0.00k    /private/tmp/com.apple.launchd.voZH6WFol3
 0.00k    /private/tmp/ct.shutdown
 $ diskhog -n 4 /tmp
 1.79m    /private/tmp
 1.38m    /private/tmp/wifi-Ea5Y9F.log
 420.57k  /private/tmp/sysp.xml
 161.17k  /private/tmp/KSOutOfProcessFetcher.12572.ppfIhqX0vjaTSb8AJYobDV7Cu68=
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/diskhog :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Find out who is hogging disk space and where.
 #
 # Argument is the directory to start from. Only calculates size of files.
 # Adds the size of files in a directory to the size of the parent directory only.
 #
 # Defaults to top 10 directories/files.
 #
 # Override with -n num to list whatever amount of large things you desire.
 # Or if you want to abuse the parser, use -1 for all files/directories.
 #
 # Defaults to pwd for space.
 #
 use File::Find;
 use Getopt::Long;
 use Cwd;
 my $debug;
 my $statbug;
 (exists($ENV{"DEBUG"})) ? $debug++ : undef;
 my $dir = Cwd::abs_path($ARGV[-1] || Cwd::getcwd());
 my %diskhogs = ();
 my %inodes = ();
 my ($topdev,undef,undef,undef,undef,undef,undef,undef) = lstat($dir);
 local $opt_displaynum = 10;
 GetOptions( 'n=i',  => \$opt_displaynum,
      );
 find(\&sieve, $dir);
 #
 # For outputing the size of a bunch of bytes in g/m/k depending upon the size
 #
 sub byte_print {
  my $byte_k = 1_024;
  my $byte_m = $byte_k**2;
  my $byte_g = $byte_k**3;
  my $bytes = pop;
  my $base = $bytes;
  my $suffix = "nil";
  my $out_string = "BUG";
  if($bytes > $byte_g){
    $base = $bytes / $byte_g;
    $suffix = "g";
  }elsif($bytes > $byte_m){
    $base = $bytes / $byte_m;
    $suffix = "m";
  }else{
    $base = $bytes / $byte_k;
    $suffix = "k";
  };
  $out_string = sprintf("%.2f%s", $base, $suffix);
  return $out_string;
 };
 #
 # Dumb function to return if an inode has already been seen.
 # So we handle hard links sane(er-ish-ly) in size calculations.
 # This has more truthiness(tm).
 #
 sub seeninode{
  my $what = pop();
  my $ret = 0;
  unless(exists($inodes{$what})){
    $inodes{$what} = 0;
    print "New inode $what added to seen inodes.\n" if $debug;
  }else{
    $inodes{$what}++;
    $ret++;
    print "Found a hardlink for $what.\n" if $debug;
  };
  return $ret;
 };
 sub sieve {
  my $file = $File::Find::name;
  my $filedir = $File::Find::dir;
  my @statinfo = lstat($file);
  my $dev = $statinfo[0];
  my $inode = $statinfo[1];
  my $size = $statinfo[7];
  my $blocksize = 512; # field 11 is the "preferred" block size, which appears
                       # to not match the actual blocksize of the filesystems
                       # in use. For now every hard drive uses 512bytes/block.
                       # Will revisit this when 4096byte/block hard drives arrive
  my $apparentsize = $statinfo[12] * $blocksize;
  print "$file\@$filedir \<$topdev\>\=\<$dev\>\n" if $debug;
  print "size,apparentsize,blocksize = <$statinfo[7],$apparentsize\,$blocksize\>\n" if $debug;
  #
  # Try to handle sparse files.
  #
  if ($size > $apparentsize) {
    print "Sparse file $file!\n" if $debug;
    $size = $apparentsize;
  };
  $dev = (-l $file) ? 0xdeadbeef : $dev;
  if (($file =~ m/\/proc|\/chroot|udev\/devices/) ||
      ($dev != $topdev) || seeninode($inode)){
    print "Pruned $file.\n" if $debug;
    $File::Find::prune = 1;
    next;
  };
  unless ($dev){
    # Yay, we can't l(stat) files. This version of perl is broken.
    # Snag information from ls, assume it's a file. Thanks Solaris 8, you suck.
    $statbug++;
    warn "Hit empty device statbug while stat()ing file <$file>.\n";
    my $ls = qx(ls -ld $file);
    my @raw = split(/\s+/, $ls);
    $diskhogs{"$file"} = $raw[4];
    $diskhogs{"$filedir"} += $raw[4];
  }elsif (-f){
    if ($debug){
      print "Adding $file size ", &byte_print($size), " to $filedir.\n";
      print "Adding $file size ", &byte_print($size), "\n";
    };
    $diskhogs{"$file"} = $size;
    $diskhogs{"$filedir"} += $size;
  }elsif (-d){
    print "Adding $file size ".&byte_print($size)."\n" if $debug;
    $diskhogs{"$file"} += $size;
  };
  if ($debug) {
    print "$file from $filedir has size ".&byte_print($diskhogs{"$file"})."\n";
  };
 };
 #
 # Reverse sort the keys by size.
 #
 my @sorted = sort {$diskhogs{$b} <=> $diskhogs{$a}} keys %diskhogs;
 splice @sorted, $opt_displaynum if @sorted > $opt_displaynum;
 warn "Found one or more instances of the stat() call statbug. This is normally only present on Solaris 8 with stock perl.\n" if $statbug;
 foreach (@sorted){
  printf "%-9s%s\n", &byte_print($diskhogs{$_}), $_;
 };
 if ($debug){
  print "DEBUG INFORMATION:\n";
  foreach (keys %diskhogs){
    printf "%-9s%s\n", &byte_print($diskhogs{$_}), $_;
  };
 };
 #+END_SRC
 * ~/bin/ifinfo
 I don't remember now why I wrote this but its just a simpler view
 of interfaces on a system.
 Probably some old solaris holdover thing I can nuke.
 Example:
 $ ifinfo
 gif0@1280        127.0.0.1/8        a:b:c:d:e:f
 en1@1500         10.1.10.15/24      a:b:c:d:e:f
 bridge100@1500   192.168.64.1/24    a:b:c:d:e:f
 Comes in slightly handy, no guarantees it parses ifconfig right tho.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/ifinfo :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Because ifconfig output is... overly verbose.
 #
 # Output information from ifconfig -a like so:
 #   interface:mtu ipv4/cidr mac_address ipv6_addr(if applicable)
 #   ipv6 is not yet in place due to a: lazy, b: can't use it yet.
 #
 use strict;
 use Socket;
 use Sys::Hostname;
 $ENV{'PATH'}='/sbin:/usr/sbin:/bin:/usr/bin';
 my ($fqdn_regexp) = qr/([0-9,a-z,A-Z,\-,\_]+)\.([0-9,a-z,A-Z,\-,\_]+)\.(com|gov)/;
 #
 # converts a 1-word (4 byte) signed or unsigned integer into a dotted decimal
 # ip address.
 #
 sub int2ip {
  my $n=int(pop);
  return(sprintf("%d.%d.%d.%d", ($n>>24)&0xff,($n>>16)&0xff,
    ($n>>8)&0xff,$n&0xff));
 };
 #
 # Convert a host/ip/netmask/cidr/etc.... to a hash of information
 # Example: host.domain.tld/24 will get the ip and calculate the netmask info
 #  equally if host.domain.tld corresponds with 1.2.3.4 the following is valid
 #  1.2.3.4/255.255.255.0 would obtain the same information.
 #
 # die()'s if anything isn't kosher.
 #
 # Ultra long function, probably needs to be looked at for condensing/splitting.
 #
 sub cidr2raw {
  my $rawinput = pop;
  my ($lhs, $rhs, $j, $uip) = (undef, undef, undef, undef);
  my ($ucidr) = 0;
  my ($network, $bits, $netmask, $broadcast, $low, $high);
  if ($rawinput =~ qr/(.*)\/(.*)/){
      $lhs = $1; $rhs = $2;
  }else{
    die "Input: $rawinput not expected.\n";
  };
  #
  # Handle ip/hostname for left hand side.
  if ($lhs =~ qr/(\d+)\.(\d+)\.(\d+)\.(\d+)/){
    foreach my $dotted (($1,$2,$3,$4)){
      if (($dotted > 255) or ($dotted < 0)){
        die "FATAL: ipv4 address entered, $lhs entered is impossible, $dotted is not between 0-255.\n";
      };
    };
    $uip = "$1.$2.$3.$4";
  };
  #
  # Handle the netmask/cidr for the right hand side,
  #
  # All input netmasks are converted to a cidr address for notation
  if ($rhs =~ qr/^(\d+)$/){ # /cidr
    $ucidr = $1;
    die "FATAL: Invalid CIDR <$ucidr>.$!\n" if (($ucidr > 32) or ($ucidr < 0));
  }elsif ($rhs =~ qr/(0[xX])?([0-9,a-f,A-F]{7})/){ # /0xhexnetmask
    my $trimmed = $2;
    my $insane = 0;
    foreach my $byte (split('', unpack("B32", pack("H*", $trimmed)))){
      ($byte) ? $ucidr++ : $insane++;
      die "FATAL: $rhs is not a valid hex netmask.$!\n" if ($insane and $byte);
    };
  }elsif ($rhs =~ qr/(\d+)\.(\d+)\.(\d+)\.(\d+)/){ # /255.255.255.0 form
    my @a = ($1, $2, $3, $4);
    my $insane = 0;
    foreach my $t (@a){
      die "FATAL: Netmask out of range. Input <$rhs> Invalid <$t>$!\n" if (($t < 0) or ($t > 255));
    };
    foreach my $byte (split('', unpack("B32", pack("C4", @a)))){
      ($byte) ? $ucidr++ : $insane++;
      die "FATAL: $rhs is not a valid netmask.$!\n" if ($insane and $byte);
    };
  }else{
    die "FATAL: Unknown or invalid netmask value entered. <$rhs>\n";
  };
  #
  # Network math GO! This is the meat of the function.
  my (@uip) = split(/\./, $uip);
  $network = 0;
  for ($j = 0; $j <= $#uip; $j++){
    $network += int($uip[$j])<<((3-$j)*8);
  };
  $bits = 0; $j = 0;
  for ($j = 31 - $ucidr; $j >= 0; $j--){
    $bits |= 1<<$j;
  };
  $netmask = 0xffffffff^$bits;
  $low = ($network&$netmask);
  $high = ($network&$netmask)+$bits-1;
  $broadcast = ($network&$netmask)|$bits;
  #
  # Throw the info back, they get a hash with zie info they may/may not need.
  # All up to the caller what they want to use.
  #
  return ("inet4" => $uip,
          "netmask" => int2ip($netmask),
          "broadcast" => int2ip($broadcast),
          "cidr" => $ucidr,
          "router" => int2ip($low+1),
          "network" => int2ip($low),
          "high" => int2ip($high),
          );
 };
 my @ifout;
 if ($ENV{'TESTING'} ne '') {
    while(<>){
        chomp($_);
        last if ($_ eq '');
        push(@ifout, $_);
 #        sleep 1;
 #        print STDERR $_ . "\n";
    }
 }else{
    open IFCONFIG, "ifconfig -a |";
    @ifout = <IFCONFIG>;
    close IFCONFIG;
 }
 # This seems wrong but it makes parsing easier due to solaris
 # non root ifconfig not displaying the mac address. Reverse the output.
 #
@ifout = reverse(@ifout);
 my @output = ();
 my ($ifname, $ifether, $ifmtu, $ifipv4, $ifnetmask, $ifipv6) = (undef,undef,undef,undef,undef,undef);
 sub printiface{
  # assume a /32 if we don't know it
  unless (defined($ifnetmask)) {
    warn "$ifname has indeterminant netmask assuming /32\n";
    $ifnetmask = '32';
  }
  unless (defined($ifnetmask)) {
    $ifether = 'unknown';
  }
  unless ($ifname =~ m/lo.*/){
    my %netinfo = cidr2raw("$ifipv4\/$ifnetmask");
    $ifnetmask = $netinfo{"cidr"};
    $ifether = lc($ifether);
    my $line = sprintf "%-16s %-18s %-17s\n", "$ifname\@$ifmtu", "$ifipv4\/$ifnetmask", $ifether;
    push @output, $line;
  }
  # reset vars
  ($ifname, $ifether, $ifmtu, $ifipv4, $ifnetmask, $ifipv6) = (undef,undef,undef,undef,undef,undef);
 };
 foreach my $line (@ifout) {
  if ($line =~ /inet\s+(\d+[.]\d+[.]\d+[.]\d+)\s+/){
    $ifipv4 = $1;
  }
  if ($line =~ m/ether\s([:,0-9,a-f,A-F]{11,})/){
    $ifether =$1;
  }
  if ($line =~ m/^([\w,\:\d+]+)\s+.*HWaddr\s([:,0-9,a-f,A-F]{11,})/){
    $ifname = $1;
    $ifether = $2;
  }
  if ($line =~ m/^(.*)\:\s+.*mtu\s(\d+)/){
    $ifname = $1;
    $ifmtu = $2;
  }
  if ($line =~ m/MTU[:](\d+)/){
    $ifmtu = $1;
  }
  if ($line =~ m/inet\saddr\:(\d+[.]\d+[.]\d+[.]\d+)/){
    $ifipv4 = $1;
  }
  if ($line =~ m/netmask\s+(0[xX])?([a-f,A-F,0-9]{8})/){
    $ifnetmask = $2;
  }
  if ($line =~ m/Mask[:](\d+\.\d+\.\d+\.\d+)/){
    $ifnetmask = $1;
  }
  if ($line =~ m/netmask\s+(\d+[.]\d+[.]\d+[.]\d+)/){
    $ifnetmask = $1;
  }
  if ($line =~ m/netmask\s+0\s+broadcast/){
    $ifnetmask = '0';
  }
  print ":$ifether:$ifname:$ifmtu:$ifipv4:$ifnetmask:$ifipv6:\n" if ($ENV{'DEBUG'} ne '');
  printiface() if ($ifname and $ifmtu and $ifipv4 );
 };
 if (scalar(@output) < 1){
  warn "No interfaces? Scripts busted yo.\n";
 }else{
  foreach my $line (reverse(@output)){
    print $line;
  }
 }
 #+END_SRC
 * ~/bin/iso8601
 Mostly because I use iso8601 timestamps and its nice to use them
 generally without depending on gnu date.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/iso8601 :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #-*-mode: Perl; coding: utf-8;-*-
 use strict;
 use warnings;
 use POSIX qw(strftime);
 my $now       = time;
 my $tz        = strftime(('%z', (localtime $now)));
 $tz =~ s/(\d{2})(\d{2})/$1:$2/smx;
 my $time = strftime('%Y-%m-%dT%H:%M:%S', (localtime $now));
 print "$time$tz\n";
 exit 0;
 #+END_SRC
 * ~/bin/whoson
 Basically getent passwd $username/$uid to show who is on a system.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/whoson :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Because i'm lazy and sick of typing in getent passwd $someusername/uid
 #
 my %who_cmds = ("solaris", "/bin/who -q",
                "linux", "/usr/bin/who -q",
                "darwin", "/usr/bin/who -q",
               );
 my $who_cmd = $who_cmds{$^O};
 local %users = ();
 foreach my $l (qx/$who_cmd/){
  next if($l =~ m/^\#.*/);
  foreach my $user (split(/\s+/,$l)){
    unless(exists($users{$user})){
      $users{$user} = 0;
    }else{
      $users{$user}++;
    };
  };
 };
 foreach my $user (keys %users){
  my $gecos = ( getpwnam($user) )[6];
  my $count = $users{$user} + 1;
  my $output = "$user\, ".((defined($gecos)) ? "$gecos, " : '')."is logged in on $count tty".(($count>1) ? "\'s" : '')."\n";
  print $output;
 };
 #+END_SRC
 * ~/bin/gecos
 Silly wrapper perl script that makes it easier to get at the gecos string for a $user/$uid.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/gecos :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Dumb wrapper to get the gecos information from a uid/username.
 foreach my $input (@ARGV){
  my $gecos = undef;
  my $uid = undef;
  my $name = undef;
  if ( $input =~ m/^\d+$/ ) {
    ( $name,$uid,$gecos ) = ( getpwuid($input) )[0,2,6];
  } else {
    ( $name,$uid,$gecos ) = ( getpwnam($input) )[0,2,6];
  }
  print "$name is '$gecos' uid '$uid'\n" if $gecos;
 }
 #+END_SRC
 * ~/bin/hatimerun
 Stupid perl script to mimic hatimerun for systems that don't have it.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/hatimerun :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # hatimerun in perl, sorta
 #
 use Getopt::Long;
 my $opt_exitcode = 99;
 my $opt_killcode = 9;
 my $opt_timeout = 60;
 GetOptions( 'e=i' => \$opt_exitcode,
            'k=i' => \$opt_killcode,
            't=i' => \$opt_timeout,
            'h' => \&opt_help,
            'help' => \&opt_help,
 );
 sub opt_help{
  my $message = <<__END__;
 UX: ERROR: invalid syntax
 usage: [-e return code][-k kill signal][-t seconds to wait]
       [-h][--help]
  Options
      --help, -h     Prints this help text.
      -e             Exit code to return on timeout.
                     NOTE: 99 by default.
      -k             Signal number to send via kill.
                     NOTE: 9 by default.
      -t             Timeout in seconds before alarming.
                     NOTE: 60 by default.
 __END__
  print $message;
  exit 1;
 };
 my $pid;
 local $SIG{ALRM} = sub { kill $opt_killcode, $pid or die "Kill failed: $!";
                         die "Timeout!\n"};
 eval{
  my $x = defined($pid = fork());
  unless ($pid){
    print qx(@ARGV);
    die "Exec of ", join(' ', @ARGV), " failed at $!\n";
  };
  alarm $opt_timeout;
  waitpid $pid => 0;
  alarm 0;
  exit 0;
 };
 if ($@){
  die "Nothing to do!\n" unless $@ eq "Timeout!\n";
  exit $opt_exitcode;
 }else{
  exit 0;
 };
 #+END_SRC
 * ~/bin/ptree.pl
 Silly perl based ptree alike implementation. Mad old code that should be avoided at all costs but it works and I'm not fixing it unless I need to.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/ptree.pl :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # ptree for linux/darwin/solaris. I got sick of ps and pstree on linux.
 # ptree works on solaris fine, but doesn't exist for darwin/linux/etc...
 #
 # TODO: Allow passing a regexp instead of a pid and passing multiple pids.
 #
 local $ENV{"PATH"} = '/bin:/usr/bin:/sbin:/usr/sbin';
 local $debug = 0;
 (exists($ENV{"DEBUG"})) ? $debug = 1 : undef;
 ($debug) ? local $| = 1 : undef; # disable buffering for STDERR and STDOUT
 sub debug_print {
  ($debug) && warn pop;
 };
 local @cmd = ('/bin/ps');
 local $init = 0;
 local $start = 1;
 if ($^O eq "linux"){
  push(@cmd, 'ajxSw');
  $start = 0;
 }elsif ($^O =~ m/darwin|freebsd/){
  push(@cmd, 'Ajwww');
 }elsif ($^O eq "solaris"){
  @cmd = ('/usr/ucb/ps');
  if ((-x "/bin/zonename") && !(qx(zonename) eq "global\n")){
    $init = qx(pgrep zsched);
    chomp($init);
    $start = $init;
  };
  push(@cmd, 'laxwww');
 }else{
  die "$^O isn't a known os to this script\n";
 };
 local @ps = qx(@cmd);
 ($?) ? die $cmd[0]." posix return code $?\n" : undef;
 local %proc;
 local @trail;
 (defined($ARGV[0])) ? $start = $ARGV[0] : undef;
 debug_print("Dump of raw line array data:\n");
 foreach my $x (@ps){
  my $cmd_index = 9;
  my $ppid = -1;
  my $pid = -1;
  next if ($x =~ m/.*PID.*/);
  my @line = split(m/\s+/,$x);
  splice(@line, 0, 1) unless ($line[0] =~ m/\d+/);
  splice(@line, 0, 1) if ("$line[0]" eq "");
  if ($^O eq "linux"){
    ($ppid,$pid) = @line;
    $cmd_index = 9;
  }elsif ($^O =~ m/darwin|freebsd/){
    ($pid,$ppid) = @line;
    $cmd_index = 8;
  }elsif ($^O eq "solaris"){
    (undef, undef, $pid,$ppid) = @line;
    for($x=$cmd_index; $x < 14; $x++){
      $cmd_index = ($line[$x] =~ m/\d+\:\d+/) ? ($x + 1) : $cmd_index;
    };
  };
  my $command = join(' ', @line[$cmd_index..$#line++]);
  (!defined $proc{$pid}) ? $proc{$pid}->{"children"} = [ ] : undef;
  (!defined $proc{$ppid}) ? $proc{$ppid}->{"children"} = [ ] : undef;
  $proc{$pid}->{"pid"} = $pid;
  $proc{$pid}->{"command"} = $command;
  $proc{$pid}->{"ppid"} = $ppid;
  push(@{$proc{$ppid}->{"children"}},$pid);
  debug_print(join(',', @line[0..($#line-1)])."\n");
 };
 if ($debug){
  debug_print("Done reading ps output\nDump of Hash\n");
  foreach my $key (sort({$a <=> $b} (keys %proc))){
    $ppid = $proc{$key}->{"ppid"};
    $command = $proc{$key}->{"command"};
    $children = join(',', @{$proc{$key}->{"children"}});
    debug_print("PID<$key> PPID<$ppid> Children<$children> Command<$command>\n");
  };
 };
 sub intrail{
  my $crumb = pop;
  my $ret = 0;
  map {$ret++ if ($crumb == $_)} @trail;
  return $ret;
 };
 sub addchildren{
  my $start_node = pop;
  foreach my $child (@{$proc{$start_node}->{"children"}}){
    next if (!defined($child) || ($start_node == $child));
    debug_print("Start ($start_node) Add child $child.\n");
    push(@trail, $child);
    addchildren($child);
  };
 };
 sub addparents{
  my $start_node = pop;
  my $parent = $proc{$start_node}->{"ppid"};
  return unless (defined($start_node));
  return if (($parent == $start_node) || !(defined($parent))); # At the top of the tree, or in a zone
  debug_print("Start ($start_node) Add parent $parent.\n");
  push(@trail, $parent);
  addparents($parent) if ($parent != $init);
 };
 sub printnode{
  my $start_node = pop;
  my $indent = pop;
  if (intrail($start_node)){
    my $pid = $proc{$start_node}->{"pid"};
    my $ppid = $proc{$start_node}->{"ppid"};
    my $cmdline = $proc{$start_node}->{"command"};
    my $indentation = '  'x($indent);
    if ($pid == $init){
      my $s = $^O." kernel";
      if ($cmdline ne ''){
        $s = $s." <$cmdline>";
      };
      $cmdline = $s;
    };
    printf("%s%d   %s\n", $indentation, $pid, $cmdline);
    foreach my $child (@{$proc{$start_node}->{"children"}}){
      next if ($pid == $child);
      printnode($indent+1,$child);
    };
  };
 };
 my $valid = 0;
 foreach my $j (keys %proc){ ($j == $start) ? $valid++ : undef; };
 debug_print("Starting from <$start>, validity is<$valid>\n");
 if ($valid){
  if (!$start){
    @trail = keys %proc;
    push(@trail, $start); push(@trail, 1);
    debug_print("Done with adding $start to trail.\n");
  }else{
    push(@trail, $start);
    debug_print("Adding children from $start.\n");
    addchildren($start);
    debug_print("Adding parents from $start.\n");
    addparents($start);
  };
  @trail = sort(@trail);
  debug_print("Trail is: ".join(',', @trail)."\nStarting at pid $start\ninit pid $init\n");
  print "PID COMMAND\n";
  my $startindent = 0;
  (intrail($startindent)) ? $startindent = -1 : undef;
  printnode($startindent,$init);
 }else{
  die "pid $start doesn't exist.\n";
 };
 exit 0;
 #+END_SRC
 * ~/bin/portchk
 Just find out if a port responds to anything tcp related or not.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/portchk :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Dumb wrapper to get the gecos information from a uid/username.
 foreach my $input (@ARGV){
  my $gecos = undef;
  my $uid = undef;
  my $name = undef;
  if ( $input =~ m/^\d+$/ ) {
    ( $name,$uid,$gecos ) = ( getpwuid($input) )[0,2,6];
  } else {
    ( $name,$uid,$gecos ) = ( getpwnam($input) )[0,2,6];
  }
  print "$name is '$gecos' uid '$uid'\n" if $gecos;
 }
 #+END_SRC
 * ~/bin/notify
 OSX only really, just fires off a notification when its ran.
 Example:
 notify "some command" "not ok"
 First param is the message, second title of the notification.
 #+BEGIN_SRC sh :mkdirp yes :tangle (when (eq osx-p t) "tmp/bin/notify") :results replace :tangle-mode (identity #o755)
 #!/bin/sh
 message=${1:="no message"}
 title=''
 if [ "${2}" != "" ]; then
  message="${2}"
  title="${1}"
 fi
 notification="display notification \"${message}\""
 [ "${title}" != "" ] && notification="${notification} with title \"${title}\""
 osascript -e "${notification}"
 #+END_SRC
 * ~/bin/today
 Stupid ruby script I wrote to highlight the week/day in a calendar.
 #+BEGIN_SRC ruby :mkdirp yes :tangle tmp/bin/today :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env ruby
 cal, today, week_color, day_color, reset = %x(cal).split(%r(\n)), Time.now.day, %x(tput sgr0;tput setab 4;tput setaf 7), %x(tput sgr0; tput setab 0;tput setaf 7;tput bold), %x(tput sgr0)
 done=false
 cal.each do |line|
  if done then
    puts line
    next
  end
  if(line =~ /^(.*\s+?)#{today}(\s+?.*)$/ or
     line =~ /^(.*\s+?)#{today}$/ or
     line =~ /^()#{today}(\s+?.*)$/ or
     line =~ /^#{today}$/ ) then
    puts "#{week_color}#{$1}#{day_color}#{today}#{week_color}#{$2}#{reset}"
    done=true
  else
    puts line
  end
 end
 #+END_SRC
--- a/+ 3
+++ b/+ 3
@@ -22,4 +22,7 @@ for file in $(find . -type f -print); do
  fi
 done
 if [ $rc != 0 ]; then
  echo differences between ${src} and ${dest}
 fi
 exit $rc
--- a/defaults.el
+++ b/defaults.el
--- a/dotprofile.org
+++ b/dotprofile.org
@@ -0,0 +1,395 @@
 #+TITLE: .profile
 #+AUTHOR: Mitch Tishmack
 #+STARTUP: hidestars
 #+STARTUP: odd
 #+BABEL: :cache yes
 #+PROPERTY: header-args :cache yes :padline no :mkdirp yes :comments no :tangle tmp/.profile
 ~/.profile setup in all its peculiarities.
 * PS1
 #+BEGIN_SRC sh
  # -*- mode: Shell-script; -*-
  # Common .profile
  #
  # DO NOT EDIT, managed by org mode
  _uname=$(uname)
  _uname_n=$(uname -n)
  _hostname=$(hostname)
  export _uname _uname_n _hostname
 #+END_SRC
 OSX uses hostname -s for getting hostname
 #+BEGIN_SRC sh :tangle (when (eq osx-p t) "tmp/.profile")
 _host=$(hostname -s)
 #+END_SRC
 Otherwise we just use what uname -n sent.
 #+BEGIN_SRC sh
 _host=${_host:=${_uname_n}}
 #+END_SRC
 * PATH
 ** haskell
 #+BEGIN_SRC sh :tangle (when (eq haskell-p t) "tmp/.profile")
 PATH="${PATH}:${HOME}/.cabal/bin"
 #+END_SRC
 ** General
 #+BEGIN_SRC sh :tangle "tmp/.profile"
 PATH="${PATH}:${HOME}/bin:${HOME}/.local/bin"
 export PATH
 #+END_SRC
 * Functions
 ** General
 Generally useful functions.
 #+BEGIN_SRC sh
 # cat out a : separated env variable
 # variable is the parameter
 cat_env()
 {
  set | grep '^'"$1"'=' > /dev/null 2>&1 && eval "echo \$$1" | tr ':' '
 ' | awk '!/^\s+$/' | awk '!/^$/'
 }
 # Convert a line delimited input to : delimited
 to_env()
 {
  awk '!a[$0]++' < /dev/stdin | tr -s '
 ' ':' | sed -e 's/\:$//' | awk 'NF > 0'
 }
 # Unshift a new value onto the env var
 # first arg is ENV second is value to unshift
 # basically prepend value to the ENV variable
 unshift_env()
 {
  new=$(eval "echo $2; echo \$$1" | to_env)
  eval "$1=${new}; export $1"
 }
 # Opposite of above, but echos what was shifted off
 shift_env()
 {
  first=$(cat_env "$1" | head -n 1)
  rest=$(cat_env "$1" | awk '{if (NR!=1) {print}}' | to_env)
  eval "$1=$rest; export $1"
  echo "${first}"
 }
 # push $2 to $1 on the variable
 push_env()
 {
  have=$(cat_env "$1")
  new=$(printf "%s
 %s" "$have" "$2" | to_env)
  eval "$1=$new; export $1"
 }
 # Remove a line matched in $HOME/.ssh/known_hosts for when there are legit
 # host key changes.
 nukehost()
 {
  if [ -z "$1" ]; then
    echo "Usage: nukehost <hostname>"
    echo "       Removes <hostname> from ssh known_host file."
  else
    sed -i -e "/$1/d" ~/.ssh/known_hosts
  fi
 }
 # Cheap copy function to make copying a file via ssh from one host
 # to another less painful, use pipeviewer to give some idea as to progress.
 ssh-copyfile()
 {
  if [ -z "$1" -o -z "$2" ]; then
    echo "Usage: copy source:/file/location destination:/file/location"
  else
    srchost="$(echo "$1" | awk -F: '{print $1}')"
    src="$(echo "$1" | awk -F: '{print $2}')"
    dsthost="$(echo "$2" | awk -F: '{print $1}')"
    dst="$(echo "$2" | awk -F: '{print $2}')"
    size=$(ssh "$srchost" du -hs "$src" 2> /dev/null)
    size=$(echo "${size}" | awk '{print $1}')
    echo "Copying $size to $dst"
    ssh "$srchost" "/bin/cat \$src" 2> /dev/null | pv -cb -N copied - | ssh "$dsthost" "/bin/cat - > \$dst" 2> /dev/null
  fi
 }
 # extract function to automate being lazy at extracting archives.
 extract()
 {
  if [ -f "$1" ]; then
    case ${1} in
      *.tar.bz2|*.tbz2|*.tbz)  bunzip2 -c "$1" | tar xvf -;;
      *.tar.gz|*.tgz)          gunzip -c "$1" | tar xvf -;;
      *.tz|*.tar.z)            zcat "$1" | tar xvf -;;
      *.tar.xz|*.txz|*.tpxz)   xz -d -c "$1" | tar xvf -;;
      *.bz2)                   bunzip2 "$1";;
      *.gz)                    gunzip "$1";;
      *.jar|*.zip)             unzip "$1";;
      *.rar)                   unrar x "$1";;
      *.tar)                   tar -xvf "$1";;
      *.z)                     uncompress "$1";;
      *.rpm)                   rpm2cpio "$1" | cpio -idv;;
      *)                       echo "Unable to extract <$1> Unknown extension."
    esac
  else
    print "File <$1> does not exist."
  fi
 }
 # Tcsh compatibility so I can be a lazy bastard and paste things directly
 # if/when I need to.
 setenv()
 {
  export "$1=$2"
 }
 # Just to be lazy, set/unset the DEBUG env variable used in my scripts
 debug()
 {
  if [ -z "$DEBUG" ]; then
    if [ -z "$1" ]; then
      echo Setting DEBUG to "$1"
      setenv DEBUG "$1"
    else
      echo Setting DEBUG to default
      setenv DEBUG default
    fi
  else
    echo Unsetting DEBUG
    unset DEBUG
  fi
 }
 login_shell()
 {
  [ "$-" = "*i*" ]
 }
 # Yeah, sick of using the web browser for this crap
 # Use is NUM FROM TO and boom get the currency converted from goggle.
 cconv()
 {
  curl -L --silent\
       "https://www.google.com/finance/converter?a=$1&from=$2&to=$3" \
         | grep converter_result \
             | perl -pe 's|[<]\w+ \w+[=]\w+[>]||g;' -e 's|[<][/]span[>]||'
 }
 #+END_SRC
 ** git
 #+BEGIN_SRC sh :tangle (when (eq git-p t) "tmp/.profile")
 maybe_git_repo()
 {
  # assume https if input doesn't contain a protocol
  proto=https
  destination=${HOME}/src
  echo "${1}" | grep '://' > /dev/null 2>&1
  [ $? = 0 ] && proto=$(echo "${1}" | sed -e 's|[:]\/\/.*||g')
  git_dir=$(echo "${1}" | sed -e 's|.*[:]\/\/||g')
  rrepo="${proto}://${git_dir}"
  # strip user@, :NNN, and .git from input uri's
  repo="${destination}/"$(echo "${git_dir}" |
    sed -e 's/\.git$//g' |
    sed -e 's|.*\@||g' |
    sed -e 's|\:[[:digit:]]\{1,\}\/|/|g' |
    tr -d '~')
  if [ ! -d "${repo}" ]; then
    git ls-remote "${rrepo}" > /dev/null 2>&1
    if [ $? = 0 ]; then
      mkdir -p "${repo}"
      echo "git clone ${rrepo} ${repo}"
      git clone --recursive "${rrepo}" "${repo}"
    else
      echo "${rrepo} doesn't look to be a git repository"
    fi
  fi
  [ -d "${repo}" ] && cd "${repo}"
 }
 gh()
 {
  maybe_git_repo "https://github.com/${1}"
 }
 bb()
 {
  maybe_git_repo "https://bitbucket.org/${1}"
 }
 #+END_SRC
 ** haskell
 #+BEGIN_SRC sh :tangle (when (eq haskell-p t) "tmp/.profile")
 hmap()
 {
  ghc -e "interact ($*)"
 }
 hmapl()
 {
  hmap "unlines.($*).lines"
 }
 hmapw()
 {
  hmapl "map (unwords.($*).words)"
 }
 #+END_SRC
 ** nix
 #+BEGIN_SRC sh :tangle (when (eq nix-p t) "tmp/.profile")
 mk_nix_shell()
 {
  cabal2nix --sha256="0" . \
    | perl -0777 -p -e 's/{.+}:/{ haskellPackages ? (import <nixpkgs> {}).haskellPackages }:/s' \
    | sed -E -e 's/(cabal\.mkDerivation)/with haskellPackages; \1/' -e 'sXsha256 = "0";Xsrc = "./.";X' \
          > shell.nix;
 }
 nix_env_setup()
 {
  # The nix installer put something like this into the .profile.
  # BAD INSTALLER NO COOKIE!
  if [ -e ${HOME}/.nix-profile/etc/profile.d/nix.sh ]; then
      . ${HOME}/.nix-profile/etc/profile.d/nix.sh;
      export NIX_PATH=${HOME}/src/github.com/NixOS/nixpkgs:nixpkgs=${HOME}/src/github.com/NixOS/nixpkgs
      export NIX_CFLAGS_COMPILE="-idirafter /usr/include"
      export NIX_CFLAGS_LINK="-L/usr/lib"
      NIX_GHC=$(type -p ghc > /dev/null 2>&1)
      if [ -n "$NIX_GHC" ]; then
          eval $(grep export "$NIX_GHC")
      fi
  fi
  nr()
  {
    nix-shell --run "$(echo $@)"
  }
 }
 nix_env_setup
 #+END_SRC
 Workaround stupid ssl crap with recent nix.
 #+BEGIN_SRC sh :tangle (when (and (eq nix-p t) (eq osx-p t)) "tmp/.profile")
 SSL_CERT_FILE="${HOME}/.nix-profile/etc/ssl/certs/ca-bundle.crt"
 GIT_SSL_CAINFO=$SSL_CERT_FILE
 export SSL_CERT_FILE
 export GIT_SSL_CAINFO
 #+END_SRC
 TODO Add linux ca-bundle detection
  if test  -e /etc/ssl/certs/ca-bundle.crt ;  # Fedora, NixOS
      set -xg SSL_CERT_FILE /etc/ssl/certs/ca-bundle.crt ;
  else if test -e /etc/ssl/certs/ca-certificates.crt ;  # Ubuntu, Debian
      set -xg SSL_CERT_FILE /etc/ssl/certs/ca-certificates.crt
 ** tmux
 #+BEGIN_SRC sh :tangle (when (eq tmux-p t) "tmp/.profile")
 t()
 {
  if [ -z "$1" ]; then
    echo "Supply a tmux session name to connect to/create"
  else
    tmux has-session -t "$1" 2>/dev/null
    [ $? != 0 ] && tmux new-session -d -s "$1"
    tmux attach-session -d -t "$1"
  fi
 }
 #+END_SRC
 ** x
 #+BEGIN_SRC sh :tangle (when (eq x-p t) "tmp/.profile")
 modmap()
 {
  [ -f "${HOME}/.Xmodmap" ] && xmodmap "${HOME}/.Xmodmap"
 }
 #+END_SRC
 * Aliases
 ** General
 #+BEGIN_SRC sh
 # general aliases
 alias s="\$(which ssh)"
 alias quit='exit'
 alias cr='reset; clear'
 alias a=ag
 alias n=noglob
 alias l=ls
 alias L='ls -dal'
 alias cleandir="find . -type f \( -name '*~' -o -name '#*#' -o -name '.*~' -o -name '.#*#' -o -name 'core' -o -name 'dead.letter*' \) | grep -v auto-save-list | xargs -t rm"
 # Prefer less for paging duties.
 which less > /dev/null 2>&1
 if [ $? -eq 0 ]; then
  alias T="\$(which less) -f +F"
 else
  alias T="\$(which tail) -f"
 fi
 alias e=emacs
 alias de=emacs --debug-init -nw
 alias ec=emacsclient
 alias ect=emacsclient -t
 alias oec=emacsclient -n -c
 alias stope=emacsclient -t -e "(save-buffers-kill-emacs)(kill-emacs)"
 alias kille=emacsclient -e "(kill-emacs)"
 #+END_SRC
 ** osx
 #+BEGIN_SRC sh :tangle (when (eq osx-p t) "tmp/.profile")
 alias o='open -a'
 #+END_SRC
 ** git
 #+BEGIN_SRC sh :tangle (when (eq git-p t) "tmp/.profile")
 alias g=git
 #+END_SRC
 ** haskell
 #+BEGIN_SRC sh :tangle (when (eq haskell-p t) "tmp/.profile")
 alias ghce="ghc -e ':l ~/.ghc.hs' -e"
 #+END_SRC
 ** mosh
 #+BEGIN_SRC sh :tangle (when (eq mosh-p t) "tmp/.profile")
 alias m=mosh
 #+END_SRC
 ** tmux
 #+BEGIN_SRC sh :tangle (when (eq tmux-p t) "tmp/.profile")
 alias tl='tmux ls'
 #+END_SRC
 * cray
 Cray specific stuff.
 #+BEGIN_SRC sh :tangle (when (eq cray-p t) "tmp/.profile")
 stash()
 {
  maybe_git_repo "ssh://git@stash.us.cray.com:7999/${1}.git" || \
      maybe_git_repo "ssh://git@stash.us.cray.com:7999/~${1}.git"
 }
 haste()
 {
  set -e
  URL=http://buildservice.us.cray.com:7777/
  if [ ! -z "$@" ]; then
    for x in "$@"; do
      if [ -f "${x}" ]; then
        curl -X POST -s -d "@${x}" ${URL}documents | awk -F '"' '{print "'$URL'"$4}';
      else
        echo "file ${x} does not exist to upload"
      fi
    done
  else
    cat /dev/stdin | curl -X POST -s -d "@-" ${URL}documents | awk -F '"' '{print "'$URL'"$4}';
  fi
  set +e
 }
 #+END_SRC
--- a/emacs.org
+++ b/emacs.org
@@ -9,6 +9,18 @@
 Startup related tasks/setup that might be used later on.
 *** tangle functions
 Duplicated from tangle.el just to make using org easier.
 TODO: make this stuff work sanely in emacs org mode and
 via external tangling. Not tangled for now.
 #+BEGIN_SRC emacs-lisp :tangle no
  (defun tangle/yn (p) (if (bound-and-true-p p) "yes" "no"))
  (defun tangle/file (p file) (if (bound-and-true-p p) (concat "tmp/" file) "no"))
 #+END_SRC
 *** emacs package setup
 Setup the builtin emacs package manager.
@@ -596,6 +608,9 @@ Highlight matching ()'s []'s etc...
 *** org-mode
 - foo
 - bar
 Org-mode keybindings and settings, pretty sparse really.
 #+BEGIN_SRC emacs-lisp
@@ -606,13 +621,38 @@ Org-mode keybindings and settings, pretty sparse really.
                      ("C-c c" . org-capture)
                      ("C-c l" . org-store-link)
                      ("C-c p" . org-latex-export-to-pdf))
               :init (use-package org-bullets)
               :init (use-package org-bullets
                       :config
                       (progn
                         (add-hook 'org-mode-hook (lambda () (org-bullets-mode 1)))))
               :config
               (progn
                 (custom-set-variables
                  '(org-log-done t)
                  '(org-hide-leading-stars t)
                  '(org-hide-emphasis-markers t)
                  )
                  (font-lock-add-keywords 'org-mode
                    '(("^ +\\([-*]\\) "
                    (0 (prog1 () (compose-region (match-beginning 1) (match-end 1) "•"))))))
                  (let* ((variable-tuple (cond ((x-list-fonts "Source Sans Pro") '(:font "Source Sans Pro"))
                    ((x-list-fonts "Lucida Grande")   '(:font "Lucida Grande"))
                    ((x-list-fonts "Verdana")         '(:font "Verdana"))
                    ((x-family-fonts "Sans Serif")    '(:family "Sans Serif"))
                    (nil (warn "Cannot find a Sans Serif Font.  Install Source Sans Pro."))))
                    (base-font-color     (face-foreground 'default nil 'default))
                    (headline           `(:inherit default :weight bold :foreground ,base-font-color)))
                  (custom-theme-set-faces 'user
                    `(org-level-8 ((t (,@headline ,@variable-tuple))))
                    `(org-level-7 ((t (,@headline ,@variable-tuple))))
                    `(org-level-6 ((t (,@headline ,@variable-tuple))))
                    `(org-level-5 ((t (,@headline ,@variable-tuple))))
                    `(org-level-4 ((t (,@headline ,@variable-tuple :height 1.1))))
                    `(org-level-3 ((t (,@headline ,@variable-tuple :height 1.25))))
                    `(org-level-2 ((t (,@headline ,@variable-tuple :height 1.5))))
                    `(org-level-1 ((t (,@headline ,@variable-tuple :height 1.75))))
                    `(org-document-title ((t (,@headline ,@variable-tuple :height 1.5 :underline nil))))))
                 (org-reload)
                 )
               )
--- a/+ 4
+++ b/+ 4
@@ -1,13 +1,13 @@
 ;;-*-mode: emacs-lisp; coding: utf-8;-*-
 ;; Copyright: 2016 Mitchell Tishmack
 ;; Tangle an org mode file with babel using emacs.
 (load-file (if (getenv "OPTIONS")
               (concat (concat "./" (getenv "OPTIONS")) ".el")
               "./options.el"))
 (require 'org-install)
 (require 'org)
 (load-file "./tangle.el")
 (load-defaults-or-options)
 ;; Iterate through all the files given and tangle them
 (dolist
    (file command-line-args-left)
--- a/git.org
+++ b/git.org
@@ -0,0 +1,140 @@
 #+TITLE: Git Configuration
 #+AUTHOR: Mitch Tishmack
 #+STARTUP: hidestars
 #+STARTUP: odd
 #+BABEL: :cache yes
 #+PROPERTY: header-args :cache yes :padline no :comments no
 General git configuration split out into sections mostly.
 * ~/.gitconfig
 :PROPERTIES:
 :header-args: :tangle tmp/.gitconfig :comments no :padline no :cache yes :mkdirp yes
 :END:
 ** pager
 #+BEGIN_SRC conf :tangle (when (eq git-p t) "tmp/.gitconfig")
 [pager]
  color = true
 #+END_SRC
 ** color
 #+BEGIN_SRC conf :tangle (when (eq git-p t) "tmp/.gitconfig")
 [color]
  status = auto
  diff = auto
  branch = auto
 [color "status"]
  added = green
  changed = blue
  untracked = red
 [color "branch"]
  current = green
  local = blue
  remote = red
 [color "diff"]
  meta = blue bold
  frag = black reverse
  old = red reverse
  new = green reverse
 #+END_SRC
 ** alias
 #+BEGIN_SRC conf :tangle (when (eq git-p t) "tmp/.gitconfig")
  [alias]
    begin = !git init && git commit --allow-empty -m 'Initial empty commit'
    up = !git pull --rebase && git push
    wsdiff = diff --color-words --ignore-space-at-eol --ignore-space-change --ignore-all-space --ignore-all-space
    wdiff = diff --color-words
    ci = commit
    ciu = commit --all
    co = checkout
    ds = diff --stat
    ba = branch --all
    st = status --short --branch
    s = status --short --branch --untracked-files=no
    unstage = reset HEAD
    tlog = log --graph --color=always --abbrev-commit --date=relative --pretty=oneline
    hist = log --graph --pretty=format:'%Cred%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset' --abbrev-commit --date=relative
    slog = log --oneline --decorate
    fixup = commit --fixup
    squash = commit --squash
    ri = rebase --interactive --autosquash
    ra = rebase --abort
    effit = reset --hard
    # What commits differ between branches, note, equivalent commits are omitted.
    # Use this with three dot operator aka master...origin/master
    cpdiff = log --no-merges --left-right --graph --cherry-pick --oneline
    # Same as ^ only equivalent commits are listed with a = sign.
    cmdiff = log --no-merges --left-right --graph --cherry-mark --oneline
    # git update with submodule update
    sup = git pull && git submodule update --init --recursive
    # git clone with submodules
    sc = !git clone --recursive $1
    # what files are getting updated a lot
    churn = !git log --all -M -C --name-only --format='format:' "$@" | sort | grep -v '^$' | uniq -c | sort | awk 'BEGIN {print "count,file"} {print $1 "," $2}'
    # help the gc a bit and get a bit more space back for a local clone
    trim = !git reflog expire --expire=now --all && git gc --prune=now
 #+END_SRC
 ** github
 #+BEGIN_SRC conf :tangle (when (eq git-p t) "tmp/.gitconfig")
 [github]
  user = mitchty
 #+END_SRC
 ** credential
 #+BEGIN_SRC conf :tangle (when (eq git-p t) "tmp/.gitconfig")
 [credential]
  helper = netrc -v -f ~/.netrc.gpg -f ~/.netrc
 #+END_SRC
 ** advice
 #+BEGIN_SRC conf :tangle (when (eq git-p t) "tmp/.gitconfig")
 [advice]
  statushints = false
 #+END_SRC
 ** gui
 #+BEGIN_SRC conf :tangle (tangle/file 'git-p ".gitconfig")
 [gui]
  fontui = -family Monaco -size 8 -weight normal -slant roman -underline 0 -overstrike 0
  fontdiff = -family Monaco -size 8 -weight normal -slant roman -underline 0 -overstrike 0
 #+END_SRC
 ** http
 #+BEGIN_SRC conf :tangle (when (eq git-p t) "tmp/.gitconfig")
 [http]
  postBuffer = 209715200
 #+END_SRC
 ** push
 #+BEGIN_SRC conf :tangle (when (eq git-p t) "tmp/.gitconfig")
 [push]
  default = simple
 #+END_SRC
 ** url rewrites
 #+BEGIN_SRC conf :tangle (tangle/file 'git-p ".gitconfig")
 [url "https://github.com/"]
  insteadOf = git://github.com/
 #+END_SRC
 ** username/email
 #+BEGIN_SRC conf :tangle (tangle/file 'git-p ".gitconfig")
 [user]
  name = Mitch Tishmack
  email = mitch.tishmack@gmail.com
 #+END_SRC
 * ~/.gitignore
 :PROPERTIES:
 :header-args: :tangle tmp/.gitignore :comments no :padline no :cache yes :mkdirp yes
 :END:
 Common crap/build artifacts that git should always ignore.
 #+BEGIN_SRC conf :tangle no
 .*~
 *~
 .\#*
 \#*
 \#*\#
 .\#*\#
 .DS_Store
 *.pyc
 *.rbc
 *.elc
 *.swp
 *.[oa]
 *.hi
 #+END_SRC
--- a/haskell.org
+++ b/haskell.org
@@ -0,0 +1,32 @@
 #+TITLE: Haskell Configuration
 #+AUTHOR: Mitch Tishmack
 #+STARTUP: hidestars
 #+STARTUP: odd
 #+BABEL: :cache yes
 #+PROPERTY: header-args :cache yes :padline no :mkdirp yes :comments no
 Haskell setup.
 * ~/.ghci
 Ghci setup, mostly just cosmetics.
 #+BEGIN_SRC haskell :tangle tmp/.ghci
 :l ~/.ghc.hs
 :set prompt "λ "
 :set +t
 #+END_SRC
 * ~/.ghc.hs
 What to automatically have loaded into ghci sessions.
 #+BEGIN_SRC haskell :tangle tmp/.ghc.hs
 import Control.Applicative
 import Control.Monad
 import Data.Monoid
 import Data.Maybe
 import Data.List
 import Data.Bool
 import qualified Data.Set as S
 import qualified Data.Map as M
 #+END_SRC
--- a/misc.org
+++ b/misc.org
@@ -0,0 +1,122 @@
 #+TITLE: Misc Configuration
 #+AUTHOR: Mitch Tishmack
 #+STARTUP: hidestars
 #+STARTUP: odd
 #+BABEL: :cache yes
 #+PROPERTY: header-args :cache yes :padline no :mkdirp yes :comments no
 Stuff that didn't fit anywhere else.
 * ~/.dir_colors
 For BSD ps, make colors closer to what the GNU utilities produce by default.
 #+BEGIN_SRC conf :tangle tmp/.dir_colors :results replace
 COLOR tty
 TERM ansi
 TERM color-xterm
 TERM con132x25
 TERM con132x30
 TERM con132x43
 TERM con132x60
 TERM con80x25
 TERM con80x28
 TERM con80x30
 TERM con80x43
 TERM con80x50
 TERM con80x60
 TERM cons25
 TERM console
 TERM cygwin
 TERM dtterm
 TERM eterm-color
 TERM Eterm
 TERM gnome
 TERM konsole
 TERM kterm
 TERM linux
 TERM linux-c
 TERM mach-color
 TERM putty
 TERM rxvt
 TERM rxvt-cygwin
 TERM rxvt-cygwin-native
 TERM rxvt-unicode
 TERM screen
 TERM screen-bce
 TERM screen-w
 TERM screen.linux
 TERM vt100
 TERM xterm
 TERM xterm-256color
 TERM xterm-color
 TERM xterm-debian
 # Below are the color init strings for the basic file types. A color init
 # string consists of one or more of the following numeric codes:
 # Attribute codes:
 # 00=none 01=bold 04=underscore 05=blink 07=reverse 08=concealed
 # Text color codes:
 # 30=black 31=red 32=green 33=yellow 34=blue 35=magenta 36=cyan 37=white
 # Background color codes:
 # 40=black 41=red 42=green 43=yellow 44=blue 45=magenta 46=cyan 47=white
 NORMAL 00           # global default, although everything should be something.
 FILE 00             # normal file
 DIR 01;34           # directory
 LINK 01;36          # symbolic link.  (If you set this to 'target' instead of a
                    # numerical value, the color will match the file pointed to)
 FIFO 40;33          # pipe
 SOCK 01;35          # socket
 DOOR 01;35          # door
 BLK 40;33;01        # block device driver
 CHR 40;33;01        # character device driver
 ORPHAN 01;05;37;41  # orphaned syminks
 MISSING 01;05;37;41 # ... and the files they point to
 # This is for files with execute permission:
 EXEC 01;32
 # List any file extensions like '.gz' or '.tar' that you would like ls
 # to colorize below. Put the extension, a space, and the color init string.
 # (and any comments you want to add after a '#')
 .cmd 01;32 # executables (bright green)
 .exe 01;32
 .com 01;32
 .btm 01;32
 .bat 01;32
 .sh  01;32
 .csh 01;32
 .ksh 01;32
 .zsh 01;32
 .tar 01;31 # archives / compressed (bright red)
 .tgz 01;31
 .arj 01;31
 .taz 01;31
 .lzh 01;31
 .zip 01;31
 .z   01;31
 .Z   01;31
 .gz  01;31
 .bz2 01;31
 .bz  01;31
 .tbz2 01;31
 .tz  01;31
 .deb 01;31
 .rpm 01;31
 .rar 01;31 # app-arch/rar
 .ace 01;31 # app-arch/unace
 .zoo 01;31 # app-arch/zoo
 .cpio 01;31 # app-arch/cpio
 .7z  01;31 # app-arch/p7zip
 .rz  01;31 # app-arch/rzip
 #+END_SRC
 * ~/.hushlogin
 Because who gives a rats when and where I last logged on from?
 #+BEGIN_SRC conf :tangle tmp/.hushlogin :results replace
 #+END_SRC
--- a/nix.org
+++ b/nix.org
@@ -0,0 +1,171 @@
 #+TITLE: Nix Configuration
 #+AUTHOR: Mitch Tishmack
 #+STARTUP: hidestars
 #+STARTUP: odd
 #+BABEL: :cache yes
 #+PROPERTY: header-args :tangle tmp/.nixpkgs/config.nix :cache yes :padline no :mkdirp yes :comments no
 Nix user config.nix setup.
 #+BEGIN_SRC conf :tangle (when (eq nix-p t) "tmp/.nixpkgs/config.nix")
 {
  allowUnfree = true;
  allowBroken = true;
  packageOverrides = pkgs: rec {
    pinentry = pkgs.pinentry.override { gtk2 = null; qt4 = null; ncurses = null; };
    gnupg = pkgs.gnupg.override { x11Support = false; pinentry = false; };
    youtube-dl = pkgs.youtube-dl.override { pandoc = null; };
    # This didn't work
    # haskell = pkgs.haskell // {
    #   packages = pkgs.haskell.packages // {
    #     ghc = pkgs.haskell.packages.ghc.override {
    #       overrides = self: pkgs: {
    #         idris = self.callPackage ./idris-0.10.nix {};
    #       };
    #     };
    #   };
    # };
    # Nor this
  # idris = pkgs.haskell.lib.overrideCabal pkgs.idris (oldAttrs: {
  #     version = "0.10";
  #     sha256 = "043adsnadjxfyk8lqkv6dgq3l6qijsj5s4rpky0zy06x5k5gx4sm";
  #   });
    default = with pkgs; buildEnv {
      name = "default";
      paths = [
        ansible
        ack
        aria
        iperf
        cacert
        curl
        clang
        clang-analyzer
        diffutils
        patchutils
        gitAndTools.gitFull
        gitAndTools.git-extras
        bazaarTools
        mercurial
        subversionClient
        gist
        mercurial
        docbook5
        entr
        emacs
        gnupg1compat
        gnutar
        gnumake
        sloccount
        cloc
        less
        multitail
        rlwrap
        gdbm
        mosh
        htop
 #        imagemagick also busted on osx now
        keychain
        silver-searcher
        aspell
        aspellDicts.en
        openssl
        pinentry
        pbzip2
        pigz
        pv
        postgresql
        readline
        rsync
        sqlite
 #        texLiveFull and now this things broken on osx nix, sigh
        tmux
        tree
        wget
        wakelan
        unzip
        upx
        xz
        multimarkdown
        jq
 #        rtags broken again on osx, fix it
 #        p7zip broken again on osx, god nix is terribad at keeping things working
        unrar
        watch
        nox
        mutt
        duply
        zsh
        pylint
        python27Packages.howdoi
        python27Packages.youtube-dl
        python27Packages.pyflakes
        python27Packages.flake8
        python27Packages.virtualenv
        python27Packages.pip
 #        xhyve        compiles normally, figure out hypervisor framework issue
        lastpass-cli
        haskellPackages.alex
        haskellPackages.happy
        haskellPackages.bake
        haskellPackages.cabal-dependency-licenses
        haskellPackages.cabal-install
        haskellPackages.cabal-meta
        haskellPackages.ghc-core
        haskellPackages.ghc-mod
        haskellPackages.hasktags
        haskellPackages.hindent
        haskellPackages.hoogle
        haskellPackages.hspec
        haskellPackages.pandoc
        haskellPackages.shake
        haskellPackages.ShellCheck
        haskellPackages.stack
        haskellPackages.nats
        haskellPackages.transformers-compat
      ];
    };
  };
 }
 #+END_SRC
 Because idris 0.11 fails its testsuite, got no time to figure it out right now.
 #+END_SRC conf :tangle (when (eq nix-p t) ".nixpkgs/idris-0.10.nix")
 { mkDerivation, annotated-wl-pprint, ansi-terminal, ansi-wl-pprint
 , async, base, base64-bytestring, binary, blaze-html, blaze-markup
 , bytestring, cheapskate, containers, deepseq, directory, filepath
 , fingertree, fsnotify, haskeline, mtl, network
 , optparse-applicative, parsers, pretty, process, safe, split
 , stdenv, text, time, transformers, transformers-compat, trifecta
 , uniplate, unix, unordered-containers, utf8-string, vector
 , vector-binary-instances, zip-archive, zlib
 }:
 mkDerivation {
  pname = "idris";
  version = "0.10";
  sha256 = "043adsnadjxfyk8lqkv6dgq3l6qijsj5s4rpky0zy06x5k5gx4sm";
  isLibrary = true;
  isExecutable = true;
  libraryHaskellDepends = [
    annotated-wl-pprint ansi-terminal ansi-wl-pprint async base
    base64-bytestring binary blaze-html blaze-markup bytestring
    cheapskate containers deepseq directory filepath fingertree
    fsnotify haskeline mtl network optparse-applicative parsers pretty
    process safe split text time transformers transformers-compat
    trifecta uniplate unix unordered-containers utf8-string vector
    vector-binary-instances zip-archive zlib
  ];
  executableHaskellDepends = [
    base directory filepath haskeline transformers
  ];
  homepage = "http://www.idris-lang.org/";
  description = "Functional Programming Language with Dependent Types";
  license = stdenv.lib.licenses.bsd3;
 }
 #+END_SRC
--- a/osx-nonix.el
+++ b/osx-nonix.el
@@ -0,0 +1,23 @@
 ;;-*-mode: emacs-lisp; coding: utf-8;-*-
 ;; All these variables control what/how readme.org gets tangled
 ;; into dotfiles. Off by default set to t to turn them on as
 ;; needed.
 ;; OS types
 (setq bsd-p nil)
 (setq linux-p nil)
 (setq osx-p t)
 ;; Optional things
 (setq nix-p nil)
 (setq tmux-p t)
 (setq git-p t)
 (setq emacs-p t)
 (setq vim-p nil)
 (setq zsh-p t)
 (setq mosh-p t)
 (setq x-p t)
 ;; Language specific
 (setq haskell-p t)
 (setq perl-p t)
--- a/perl.org
+++ b/perl.org
@@ -0,0 +1,93 @@
 #+TITLE: Perl Configuration
 #+AUTHOR: Mitch Tishmack
 #+STARTUP: hidestars
 #+STARTUP: odd
 #+BABEL: :cache yes
 #+PROPERTY: header-args :cache yes :padline no :mkdirp yes :comments no
 Mostly old holdovers from the days of perl, just perlcritic and perltidy configuration.
 * ~/.perlcriticrc
 What to complain about by default.
 #+BEGIN_SRC conf :tangle tmp/.perlcritirc :results replace
 # Show the severity level
 severity = 1
 # Basically show what profile is complaining
 verbose = %f:%l:%c: %m, %e (%p, severity %s)\n
 # Don't warn on these variables
 [Variables::ProhibitPunctuationVars]
 allow = $@ $!
 # Ignore syscall returns on print, it not actually returning is... whatever.
 [InputOutput::RequireCheckedSyscalls]
 exclude_functions = print say
 # Allow things like print qx(somecmd) in a void context to work, this is ok.
 [InputOutput::ProhibitBacktickOperators]
 only_in_void_context = 1
 # I actually like using unless... so don't piss me off whinging about it
 [-ControlStructures::ProhibitUnlessBlocks]
 # The following only apply to modules
 [-Modules::RequireVersionVar]
 [-ErrorHandling::RequireCarping]
 # Tabs suck, no
 [CodeLayout::ProhibitHardTabs]
 allow_leading_tabs = 0
 # For small regexes, no /x at the end is fine, 12 should be enough
 [RegularExpressions::RequireExtendedFormatting]
 minimum_regex_length_to_complain_about = 12
 # These are kosher kthxbai
 [ControlStructures::ProhibitPostfixControls]
 allow = for if until unless
 # For POE, we do things like my $foo = $_[HEAP]; and thats OK
 [Subroutines::RequireArgUnpacking]
 allow_subscripts = 1
 # For POD documentation, I don't care about required sections.
 [Documentation::RequirePodSections]
 lib_sections = NAME | SYNOPSIS | DESCRIPTION | AUTHOR | COPYRIGHT | SEE ALSO
 script_sections = NAME | SYNOPSIS | DESCRIPTION | AUTHOR | COPYRIGHT | SEE ALSO
 # This is for POD documentation mainly.
 [CodeLayout::ProhibitHardTabs]
 allow_leading_tabs = 1
 #+END_SRC
 * ~/.perltidyrc
 Control how perltidy should clean things up.
 #+BEGIN_SRC conf :tangle tmp/.perltidyrc :results replace
 # cuddled elses pls
 -ce
 # indent 2 spaces
 -i=2
 # for tokens with things like arrays, start the data next line down one indent in
 -lp
 # align closing tokens for things like arrays with the opening token
 -cti=1
 # default, but spaces between multiple entries, none with one arg
 -pt=1
 # line encoding
 -ole=unix
 # braces not on new line
 -nsbl
 # stack opening tokens, don't create a new line with one token, note no stacking of closing tokens
 -sot
 # no space before ;'s in for loops
 -nsfs
 # Make curly braces act more like the args param
 -bbt=1
 # Trim qw whitespaces
 -tqw
 #+END_SRC
--- a/readme.org
+++ b/readme.org
@@ -56,7 +56,7 @@ Where N is the generation you want to copy.
 ** How does it work?
 It is really rather simple, the makefile isn't that complex. Look at that
 It is really rather simple, the [[file:Makefile][Makefile]] isn't that complex. Look at that
 for details.
 This isn't intended to cover everything. This could be considered a template
@@ -70,7 +70,7 @@ files is the users job, not this setup.
 ** Explanation of what is happening
 The file options.el controls predicates that change how files get tangled to files.
 The file [[file:defaults.el][defaults.el]] controls predicates that change how files get tangled to files.
 This allows me to tangle files that would be useful for linux/bsd/etc...
 without affecting the existing files.
@@ -96,7 +96,7 @@ to generate config files, not necessarily to use them.
 Should be easy enough to either clone this repo or copy things to a new repo
 and hack in what you need. Your call.
 But, say you have a heading, take .profile which comes up next, under the
 But, say you have a heading, take .profile as an example, under an org mode
 heading you would just add:
 #+BEGIN_SRC org :tangle no
@@ -122,2634 +122,38 @@ Pretty simple, just add a source block like normal:
 #+END_SRC
 ** TODO
 - [ ] Auto load-file options.el to make code blocks editable in their major
 modes.
 - [ ] Need to have some way to autocleanup old generations. Rm works for now
 so meh.
 - [ ] Need to add the ability to detect that make is generating a pointless
 new generation. Aka generation N and generation N-1 are the same, just leave
 N and don't increment.
 - [ ] Maybe checksum file contents somehow and use that?
 - [ ] More? For now its functional.
 * ~/.profile
 :PROPERTIES:
 :header-args: :tangle tmp/.profile :comments no :padline no :cache yes :mkdirp yes
 :END:
 ** PS1
 #+BEGIN_SRC sh
  # -*- mode: Shell-script; -*-
  # Common .profile
  #
  # DO NOT EDIT, managed by org mode
  _uname=$(uname)
  _uname_n=$(uname -n)
  _hostname=$(hostname)
  export _uname _uname_n _hostname
 #+END_SRC
 OSX uses hostname -s for getting hostname
 #+BEGIN_SRC sh :tangle (when (eq osx-p t) "tmp/.profile")
 _host=$(hostname -s)
 #+END_SRC
 Otherwise we just use what uname -n sent.
 #+BEGIN_SRC sh
 _host=${_host:=${_uname_n}}
 #+END_SRC
 ** PATH
 *** osx
 OSX homebrew leftovers, need to make sure it make sense any longer as I've switched to nix.
 #+BEGIN_SRC sh :tangle (when (eq osx-p t) "tmp/.profile")
 osx_release=$(sw_vers -productVersion | sed -e 's/\.[0-9]\{1\}//2')
 brew_home=/usr/local/brew/${osx_release}
 PATH="${brew_home}/bin:/usr/local/bin:${PATH}"
 export PATH
 #+END_SRC
 *** haskell
 #+BEGIN_SRC sh :tangle (when (eq haskell-p t) "tmp/.profile")
 PATH="${PATH}:${HOME}/.cabal/bin"
 #+END_SRC
 *** General
 #+BEGIN_SRC sh :tangle "tmp/.profile"
 PATH="${PATH}:${HOME}/bin"
 export PATH
 #+END_SRC
 ** Functions
 *** General
 Generally useful functions.
 #+BEGIN_SRC sh
 # cat out a : separated env variable
 # variable is the parameter
 cat_env()
 {
  set | grep '^'"$1"'=' > /dev/null 2>&1 && eval "echo \$$1" | tr ':' '
 ' | awk '!/^\s+$/' | awk '!/^$/'
 }
 # Convert a line delimited input to : delimited
 to_env()
 {
  awk '!a[$0]++' < /dev/stdin | tr -s '
 ' ':' | sed -e 's/\:$//' | awk 'NF > 0'
 }
 # Unshift a new value onto the env var
 # first arg is ENV second is value to unshift
 # basically prepend value to the ENV variable
 unshift_env()
 {
  new=$(eval "echo $2; echo \$$1" | to_env)
  eval "$1=${new}; export $1"
 }
 # Opposite of above, but echos what was shifted off
 shift_env()
 {
  first=$(cat_env "$1" | head -n 1)
  rest=$(cat_env "$1" | awk '{if (NR!=1) {print}}' | to_env)
  eval "$1=$rest; export $1"
  echo "${first}"
 }
 # push $2 to $1 on the variable
 push_env()
 {
  have=$(cat_env "$1")
  new=$(printf "%s
 %s" "$have" "$2" | to_env)
  eval "$1=$new; export $1"
 }
 # Remove a line matched in $HOME/.ssh/known_hosts for when there are legit
 # host key changes.
 nukehost()
 {
  if [ -z "$1" ]; then
    echo "Usage: nukehost <hostname>"
    echo "       Removes <hostname> from ssh known_host file."
  else
    sed -i -e "/$1/d" ~/.ssh/known_hosts
  fi
 }
 # Cheap copy function to make copying a file via ssh from one host
 # to another less painful, use pipeviewer to give some idea as to progress.
 ssh-copyfile()
 {
  if [ -z "$1" -o -z "$2" ]; then
    echo "Usage: copy source:/file/location destination:/file/location"
  else
    srchost="$(echo "$1" | awk -F: '{print $1}')"
    src="$(echo "$1" | awk -F: '{print $2}')"
    dsthost="$(echo "$2" | awk -F: '{print $1}')"
    dst="$(echo "$2" | awk -F: '{print $2}')"
    size=$(ssh "$srchost" du -hs "$src" 2> /dev/null)
    size=$(echo "${size}" | awk '{print $1}')
    echo "Copying $size to $dst"
    ssh "$srchost" "/bin/cat \$src" 2> /dev/null | pv -cb -N copied - | ssh "$dsthost" "/bin/cat - > \$dst" 2> /dev/null
  fi
 }
 # extract function to automate being lazy at extracting archives.
 extract()
 {
  if [ -f "$1" ]; then
    case ${1} in
      *.tar.bz2|*.tbz2|*.tbz)  bunzip2 -c "$1" | tar xvf -;;
      *.tar.gz|*.tgz)          gunzip -c "$1" | tar xvf -;;
      *.tz|*.tar.z)            zcat "$1" | tar xvf -;;
      *.tar.xz|*.txz|*.tpxz)   xz -d -c "$1" | tar xvf -;;
      *.bz2)                   bunzip2 "$1";;
      *.gz)                    gunzip "$1";;
      *.jar|*.zip)             unzip "$1";;
      *.rar)                   unrar x "$1";;
      *.tar)                   tar -xvf "$1";;
      *.z)                     uncompress "$1";;
      *.rpm)                   rpm2cpio "$1" | cpio -idv;;
      *)                       echo "Unable to extract <$1> Unknown extension."
    esac
  else
    print "File <$1> does not exist."
  fi
 }
 # Tcsh compatibility so I can be a lazy bastard and paste things directly
 # if/when I need to.
 setenv()
 {
  export "$1=$2"
 }
 # Just to be lazy, set/unset the DEBUG env variable used in my scripts
 debug()
 {
  if [ -z "$DEBUG" ]; then
    if [ -z "$1" ]; then
      echo Setting DEBUG to "$1"
      setenv DEBUG "$1"
    else
      echo Setting DEBUG to default
      setenv DEBUG default
    fi
  else
    echo Unsetting DEBUG
    unset DEBUG
  fi
 }
 login_shell()
 {
  [ "$-" = "*i*" ]
 }
 # Yeah, sick of using the web browser for this crap
 # Use is NUM FROM TO and boom get the currency converted from goggle.
 cconv()
 {
  curl -L --silent\
       "https://www.google.com/finance/converter?a=$1&from=$2&to=$3" \
         | grep converter_result \
             | perl -pe 's|[<]\w+ \w+[=]\w+[>]||g;' -e 's|[<][/]span[>]||'
 }
 #+END_SRC
 *** git
 #+BEGIN_SRC sh :tangle (when (eq git-p t) "tmp/.profile")
 maybe_git_repo()
 {
  # assume https if input doesn't contain a protocol
  proto=https
  destination=${HOME}/src
  echo "${1}" | grep '://' > /dev/null 2>&1
  [ $? = 0 ] && proto=$(echo "${1}" | sed -e 's|[:]\/\/.*||g')
  git_dir=$(echo "${1}" | sed -e 's|.*[:]\/\/||g')
  rrepo="${proto}://${git_dir}"
  # strip user@, :NNN, and .git from input uri's
  repo="${destination}/"$(echo "${git_dir}" |
    sed -e 's/\.git$//g' |
    sed -e 's|.*\@||g' |
    sed -e 's|\:[[:digit:]]\{1,\}\/|/|g' |
    tr -d '~')
  if [ ! -d "${repo}" ]; then
    git ls-remote "${rrepo}" > /dev/null 2>&1
    if [ $? = 0 ]; then
      mkdir -p "${repo}"
      echo "git clone ${rrepo} ${repo}"
      git clone --recursive "${rrepo}" "${repo}"
    else
      echo "${rrepo} doesn't look to be a git repository"
    fi
  fi
  [ -d "${repo}" ] && cd "${repo}"
 }
 gh()
 {
  maybe_git_repo "https://github.com/${1}"
 }
 bb()
 {
  maybe_git_repo "https://bitbucket.org/${1}"
 }
 #+END_SRC
 *** haskell
 #+BEGIN_SRC sh :tangle (when (eq haskell-p t) "tmp/.profile")
 hmap()
 {
  ghc -e "interact ($*)"
 }
 hmapl()
 {
  hmap "unlines.($*).lines"
 }
 hmapw()
 {
  hmapl "map (unwords.($*).words)"
 }
 #+END_SRC
 *** nix
 #+BEGIN_SRC sh :tangle (when (eq nix-p t) "tmp/.profile")
 mk_nix_shell()
 {
  cabal2nix --sha256="0" . \
    | perl -0777 -p -e 's/{.+}:/{ haskellPackages ? (import <nixpkgs> {}).haskellPackages }:/s' \
    | sed -E -e 's/(cabal\.mkDerivation)/with haskellPackages; \1/' -e 'sXsha256 = "0";Xsrc = "./.";X' \
          > shell.nix;
 }
 nix_env_setup()
 {
  # The nix installer put something like this into the .profile.
  # BAD INSTALLER NO COOKIE!
  if [ -e ${HOME}/.nix-profile/etc/profile.d/nix.sh ]; then
      . ${HOME}/.nix-profile/etc/profile.d/nix.sh;
      export NIX_PATH=${HOME}/src/github.com/NixOS/nixpkgs:nixpkgs=${HOME}/src/github.com/NixOS/nixpkgs
      export NIX_CFLAGS_COMPILE="-idirafter /usr/include"
      export NIX_CFLAGS_LINK="-L/usr/lib"
      NIX_GHC=$(type -p ghc > /dev/null 2>&1)
      if [ -n "$NIX_GHC" ]; then
          eval $(grep export "$NIX_GHC")
      fi
  fi
  nr()
  {
    nix-shell --run "$(echo $@)"
  }
 }
 nix_env_setup
 #+END_SRC
 Workaround stupid ssl crap with recent nix.
 #+BEGIN_SRC sh :tangle (when (and (eq nix-p t) (eq osx-p t)) "tmp/.profile")
 SSL_CERT_FILE="${HOME}/.nix-profile/etc/ssl/certs/ca-bundle.crt"
 GIT_SSL_CAINFO=$SSL_CERT_FILE
 export SSL_CERT_FILE
 export GIT_SSL_CAINFO
 #+END_SRC
 TODO Add linux ca-bundle detection
  if test  -e /etc/ssl/certs/ca-bundle.crt ;  # Fedora, NixOS
      set -xg SSL_CERT_FILE /etc/ssl/certs/ca-bundle.crt ;
  else if test -e /etc/ssl/certs/ca-certificates.crt ;  # Ubuntu, Debian
      set -xg SSL_CERT_FILE /etc/ssl/certs/ca-certificates.crt
 *** tmux
 #+BEGIN_SRC sh :tangle (when (eq tmux-p t) "tmp/.profile")
 t()
 {
  if [ -z "$1" ]; then
    echo "Supply a tmux session name to connect to/create"
  else
    tmux has-session -t "$1" 2>/dev/null
    [ $? != 0 ] && tmux new-session -d -s "$1"
    tmux attach-session -d -t "$1"
  fi
 }
 #+END_SRC
 *** x
 #+BEGIN_SRC sh :tangle (when (eq x-p t) "tmp/.profile")
 modmap()
 {
 	[ -f "${HOME}/.Xmodmap" ] && xmodmap "${HOME}/.Xmodmap"
 }
 #+END_SRC
 *** cray
 #+BEGIN_SRC sh :tangle (when (eq cray-p t) "tmp/.profile")
 stash()
 {
  maybe_git_repo "ssh://git@stash.us.cray.com:7999/${1}.git" || \
      maybe_git_repo "ssh://git@stash.us.cray.com:7999/~${1}.git"
 }
 haste()
 {
  set -e
  URL=http://buildservice.us.cray.com:7777/
  if [ ! -z "$@" ]; then
    for x in "$@"; do
      if [ -f "${x}" ]; then
        curl -X POST -s -d "@${x}" ${URL}documents | awk -F '"' '{print "'$URL'"$4}';
      else
        echo "file ${x} does not exist to upload"
      fi
    done
  else
    cat /dev/stdin | curl -X POST -s -d "@-" ${URL}documents | awk -F '"' '{print "'$URL'"$4}';
  fi
  set +e
 }
 #+END_SRC
 ** Aliases
 *** General
 #+BEGIN_SRC sh
 # general aliases
 alias s="\$(which ssh)"
 alias quit='exit'
 alias cr='reset; clear'
 alias a=ag
 alias n=noglob
 alias l=ls
 alias L='ls -dal'
 alias cleandir="find . -type f \( -name '*~' -o -name '#*#' -o -name '.*~' -o -name '.#*#' -o -name 'core' -o -name 'dead.letter*' \) | grep -v auto-save-list | xargs -t rm"
 # Prefer less for paging duties.
 which less > /dev/null 2>&1
 if [ $? -eq 0 ]; then
  alias T="\$(which less) -f +F"
 else
  alias T="\$(which tail) -f"
 fi
 alias e=emacs
 alias de=emacs --debug-init -nw
 alias ec=emacsclient
 alias ect=emacsclient -t
 alias oec=emacsclient -n -c
 alias stope=emacsclient -t -e "(save-buffers-kill-emacs)(kill-emacs)"
 alias kille=emacsclient -e "(kill-emacs)"
 #+END_SRC
 *** osx
 #+BEGIN_SRC sh :tangle (when (eq osx-p t) "tmp/.profile")
 alias o='open -a'
 #+END_SRC
 *** git
 #+BEGIN_SRC sh :tangle (when (eq git-p t) "tmp/.profile")
 alias g=git
 #+END_SRC
 *** haskell
 #+BEGIN_SRC sh :tangle (when (eq haskell-p t) "tmp/.profile")
 alias ghce="ghc -e ':l ~/.ghc.hs' -e"
 #+END_SRC
 *** mosh
 #+BEGIN_SRC sh :tangle (when (eq mosh-p t) "tmp/.profile")
 alias m=mosh
 #+END_SRC
 *** tmux
 #+BEGIN_SRC sh :tangle (when (eq tmux-p t) "tmp/.profile")
 alias tl='tmux ls'
 #+END_SRC
 * ~/bin
 ** ~/bin/cidr
 A stupid script I wrote ages ago to help me be lazy with cidr
 notation for stuff. Setup the wrong netmask a few times and
 you too, will wish for something similar.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/cidr :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Convert input ip/cidr|netmask|hexnetmask to useable network information.
 #
 use strict;
 use warnings;
 use Socket;
 use Sys::Hostname;
 #
 # Globalish vars
 #
 $ENV{PATH} = '/usr/bin:/bin:/usr/sbin:/sbin'; # Paranoia, know thy name!
 my ($fqdn_regexp) = qr/([0-9,a-z,A-Z,\-,\_]+)\.([0-9,a-z,A-Z,\-,\_]+)\.(com|gov)/;
 #
 # converts a 1-word (4 byte) signed or unsigned integer into a dotted decimal
 # ip address.
 #
 sub int2ip {
  my $n=int(pop);
  return(sprintf("%d.%d.%d.%d", ($n>>24)&0xff,($n>>16)&0xff,
    ($n>>8)&0xff,$n&0xff));
 };
 #
 # Convert a host/ip/netmask/cidr/etc.... to a hash of information
 # Example: host.domain.tld/24 will get the ip and calculate the netmask info
 #  equally if host.domain.tld corresponds with 1.2.3.4 the following is valid
 #  1.2.3.4/255.255.255.0 would obtain the same information.
 #
 # die()'s if anything isn't kosher.
 #
 # Ultra long function, probably needs to be looked at for condensing/splitting.
 #
 sub cidr2raw {
  my $rawinput = pop;
  my ($lhs, $rhs, $j, $uip) = (undef, undef, undef, undef);
  my ($ucidr) = 0;
  my ($network, $bits, $netmask, $broadcast, $low, $high);
  if ($rawinput =~ qr/(.*)\/(.*)/){
      $lhs = $1; $rhs = $2;
  }else{
    die "Input: $rawinput not expected.\n";
  };
  #
  # Handle ip/hostname for left hand side.
  if ($lhs =~ qr/(\d+)\.(\d+)\.(\d+)\.(\d+)/){
    foreach my $dotted (($1,$2,$3,$4)){
      if (($dotted > 255) or ($dotted < 0)){
        die "FATAL: ipv4 address entered, $lhs entered is impossible, $dotted is not between 0-255.\n";
      };
    };
    $uip = inet_ntoa(scalar gethostbyname($lhs));
    die "FATAL: Cannot determine hostname for $lhs$!\n" if (!defined($lhs));
  }elsif ($lhs =~ $fqdn_regexp){
    my $tmp = gethostbyname($lhs);
    die "FATAL: Cannot determine ip for $lhs" if (!defined($tmp));
    $uip = inet_ntoa($tmp);
  }else{
    die "FATAL: host value not fully qualified, or not an ip <$lhs>\n";
  };
  #
  # Handle the netmask/cidr for the right hand side,
  #
  # All input netmasks are converted to a cidr address for notation
  if ($rhs =~ qr/^(\d+)$/){ # /cidr
    $ucidr = $1;
    die "FATAL: Invalid CIDR <$ucidr>.$!\n" if (($ucidr > 32) or ($ucidr < 0));
  }elsif ($rhs =~ qr/(0[xX])?([0-9,a-f,A-F]{7})/){ # /0xhexnetmask
    my $trimmed = $2;
    my $insane = 0;
    foreach my $byte (split('', unpack("B32", pack("H*", $trimmed)))){
      ($byte) ? $ucidr++ : $insane++;
      die "FATAL: $rhs is not a valid hex netmask.$!\n" if ($insane and $byte);
    };
  }elsif ($rhs =~ qr/(\d+)\.(\d+)\.(\d+)\.(\d+)/){ # /255.255.255.0 form
    my @a = ($1, $2, $3, $4);
    my $insane = 0;
    foreach my $t (@a){
      die "FATAL: Netmask out of range. Input <$rhs> Invalid <$t>$!\n" if (($t < 0) or ($t > 255));
    };
    foreach my $byte (split('', unpack("B32", pack("C4", @a)))){
      ($byte) ? $ucidr++ : $insane++;
      die "FATAL: $rhs is not a valid netmask.$!\n" if ($insane and $byte);
    };
  }else{
    die "FATAL: Unknown or invalid netmask value entered. <$rhs>\n";
  };
  #
  # Network math GO! This is the meat of the function.
  my (@uip) = split(/\./, $uip);
  $network = 0;
  for ($j = 0; $j <= $#uip; $j++){
    $network += int($uip[$j])<<((3-$j)*8);
  };
  $bits = 0; $j = 0;
  for ($j = 31 - $ucidr; $j >= 0; $j--){
    $bits |= 1<<$j;
  };
  $netmask = 0xffffffff^$bits;
  $low = ($network&$netmask);
  $high = ($network&$netmask)+$bits-1;
  $broadcast = ($network&$netmask)|$bits;
  my ($guessed_hostname,undef,undef,undef,undef) = gethostbyaddr(inet_aton($uip), AF_INET);
  #
  # Throw the info back, they get a hash with zie info they may/may not need.
  # All up to the caller what they want to use.
  #
  return ("inet4" => $uip,
          "netmask" => int2ip($netmask),
          "broadcast" => int2ip($broadcast),
          "cidr" => $ucidr,
          "router" => int2ip($low+1),
          "network" => int2ip($low),
          "high" => int2ip($high),
          "hostname" => $guessed_hostname,
          );
 };
 #package Main; # future use
 foreach my $arg (@ARGV){
  my %stuff = cidr2raw($arg);
  printf("%s/%s is %s/%s\n%-12s\t%s\n%-12s\t%s\n%-12s\t%s\n%-12s\t%s\n%-12s\t%s\n",
             $stuff{"inet4"},$stuff{"cidr"},
             $stuff{"network"},$stuff{"cidr"},
             "Netmask",$stuff{"netmask"},
             "Broadcast",$stuff{"broadcast"},
             "Network",$stuff{"network"},
             "Router",$stuff{"router"},
             "HighUsable",$stuff{"high"},
      );
 };
 #+END_SRC
 ** ~/bin/dns
 Just a silly dns script that slighly mimics the old host utility
 of yore. Can also do reverse lookups.
 Example:
 $ dns google.com
 google.com is 216.58.216.206
 google.com is also google.com
 $ dns 216.58.216.206
 ord31s21-in-f206.1e100.net is 216.58.216.206
 ord31s21-in-f206.1e100.net is also ord31s21-in-f206.1e100.net
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/dns :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Stupid script to help with dns information. Solaris 9/8 lack the host utility.
 # Which this (kinda) mimics, except the mx record crap
 use strict;
 use warnings;
 use Socket;
 use Sys::Hostname;
 my $input = shift || hostname();
 my $lookup = $input;
 if ( $lookup =~ /\d+[.]\d+[.]\d+[.]\d+/smx ) {
  $lookup = ( gethostbyaddr inet_aton($lookup), AF_INET )[0];
  die "Error: Unable to reverse lookup ip $input.\n" if ( $lookup eq q{} );
 }
 my $ipv4 = gethostbyname $lookup;
 die "Error: $lookup doesn't have any known ip addresses\n"
  if ( !defined $ipv4 );
 $ipv4 = inet_ntoa($ipv4);
 my ( $short_name, $aliases, $addrtype, $len, @addrs ) = gethostbyname $lookup;
 foreach my $ipv4 (@addrs) {
  $ipv4 = inet_ntoa($ipv4);
  print "$lookup is $ipv4\n";
 }
 print "$lookup is also $short_name\n";
 if ( defined $aliases and "$aliases" ne q{} ) {
  print "aliases are ($aliases)\n";
 }
 exit 0;
 #+END_SRC
 ** ~/bin/ts
 Stupid simple timestamp script that just takes input, and prefixes a timestamp to to output. Thats it.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/ts :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Timestamp stdin and then print to stdout and flush.
 #
 # Thats about it. Might add a quick and dirty option to allow you to
 # specify the time output whatnot. But this is intended to be simple.
 use strict;
 use warnings;
 use POSIX qw(strftime);
 use IO::Handle;
 STDOUT->autoflush(1);
 while(<STDIN>){
  my $now       = time;
  my $tz        = strftime(('%z', (localtime $now)));
  $tz =~ s/(\d{2})(\d{2})/$1:$2/smx;
  my $time = strftime('%Y-%m-%dT%H:%M:%S', (localtime $now));
  print "$time$tz ".$_;
 };
 #+END_SRC
 ** ~/bin/diskhog
 Old script I wrote after I had to figure out where space was used and it was mostly all in a directory with a ton of small files.
 Written in anger. Not all that useful nominally.
 Defaults to /tmp if you don't specify where, also defaults to the top 10 offenders/users of space.
 Its not particuarly bright, or even good code. If you want ALL THE THINGS, pass -n -1 in and you will get a ton of output. Good luck with that.
 Example:
 $ diskhog
 1.79m    /private/tmp
 1.38m    /private/tmp/wifi-Ea5Y9F.log
 420.57k  /private/tmp/sysp.xml
 161.17k  /private/tmp/KSOutOfProcessFetcher.12572.ppfIhqX0vjaTSb8AJYobDV7Cu68=/ksfetch
 161.17k  /private/tmp/KSOutOfProcessFetcher.12572.ppfIhqX0vjaTSb8AJYobDV7Cu68=
 0.00k    /private/tmp/com.apple.launchd.yaVsd6J1re
 0.00k    /private/tmp/cvcd
 0.00k    /private/tmp/com.apple.launchd.IPS1lPqGTD
 0.00k    /private/tmp/com.apple.launchd.voZH6WFol3
 0.00k    /private/tmp/ct.shutdown
 $ diskhog -n 4 /tmp
 1.79m    /private/tmp
 1.38m    /private/tmp/wifi-Ea5Y9F.log
 420.57k  /private/tmp/sysp.xml
 161.17k  /private/tmp/KSOutOfProcessFetcher.12572.ppfIhqX0vjaTSb8AJYobDV7Cu68=
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/diskhog :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Find out who is hogging disk space and where.
 #
 # Argument is the directory to start from. Only calculates size of files.
 # Adds the size of files in a directory to the size of the parent directory only.
 #
 # Defaults to top 10 directories/files.
 #
 # Override with -n num to list whatever amount of large things you desire.
 # Or if you want to abuse the parser, use -1 for all files/directories.
 #
 # Defaults to pwd for space.
 #
 use File::Find;
 use Getopt::Long;
 use Cwd;
 my $debug;
 my $statbug;
 (exists($ENV{"DEBUG"})) ? $debug++ : undef;
 my $dir = Cwd::abs_path($ARGV[-1] || Cwd::getcwd());
 my %diskhogs = ();
 my %inodes = ();
 my ($topdev,undef,undef,undef,undef,undef,undef,undef) = lstat($dir);
 local $opt_displaynum = 10;
 GetOptions( 'n=i',  => \$opt_displaynum,
      );
 find(\&sieve, $dir);
 #
 # For outputing the size of a bunch of bytes in g/m/k depending upon the size
 #
 sub byte_print {
  my $byte_k = 1_024;
  my $byte_m = $byte_k**2;
  my $byte_g = $byte_k**3;
  my $bytes = pop;
  my $base = $bytes;
  my $suffix = "nil";
  my $out_string = "BUG";
  if($bytes > $byte_g){
    $base = $bytes / $byte_g;
    $suffix = "g";
  }elsif($bytes > $byte_m){
    $base = $bytes / $byte_m;
    $suffix = "m";
  }else{
    $base = $bytes / $byte_k;
    $suffix = "k";
  };
  $out_string = sprintf("%.2f%s", $base, $suffix);
  return $out_string;
 };
 #
 # Dumb function to return if an inode has already been seen.
 # So we handle hard links sane(er-ish-ly) in size calculations.
 # This has more truthiness(tm).
 #
 sub seeninode{
  my $what = pop();
  my $ret = 0;
  unless(exists($inodes{$what})){
    $inodes{$what} = 0;
    print "New inode $what added to seen inodes.\n" if $debug;
  }else{
    $inodes{$what}++;
    $ret++;
    print "Found a hardlink for $what.\n" if $debug;
  };
  return $ret;
 };
 sub sieve {
  my $file = $File::Find::name;
  my $filedir = $File::Find::dir;
  my @statinfo = lstat($file);
  my $dev = $statinfo[0];
  my $inode = $statinfo[1];
  my $size = $statinfo[7];
  my $blocksize = 512; # field 11 is the "preferred" block size, which appears
                       # to not match the actual blocksize of the filesystems
                       # in use. For now every hard drive uses 512bytes/block.
                       # Will revisit this when 4096byte/block hard drives arrive
  my $apparentsize = $statinfo[12] * $blocksize;
  print "$file\@$filedir \<$topdev\>\=\<$dev\>\n" if $debug;
  print "size,apparentsize,blocksize = <$statinfo[7],$apparentsize\,$blocksize\>\n" if $debug;
  #
  # Try to handle sparse files.
  #
  if ($size > $apparentsize) {
    print "Sparse file $file!\n" if $debug;
    $size = $apparentsize;
  };
  $dev = (-l $file) ? 0xdeadbeef : $dev;
  if (($file =~ m/\/proc|\/chroot|udev\/devices/) ||
      ($dev != $topdev) || seeninode($inode)){
    print "Pruned $file.\n" if $debug;
    $File::Find::prune = 1;
    next;
  };
  unless ($dev){
    # Yay, we can't l(stat) files. This version of perl is broken.
    # Snag information from ls, assume it's a file. Thanks Solaris 8, you suck.
    $statbug++;
    warn "Hit empty device statbug while stat()ing file <$file>.\n";
    my $ls = qx(ls -ld $file);
    my @raw = split(/\s+/, $ls);
    $diskhogs{"$file"} = $raw[4];
    $diskhogs{"$filedir"} += $raw[4];
  }elsif (-f){
    if ($debug){
      print "Adding $file size ", &byte_print($size), " to $filedir.\n";
      print "Adding $file size ", &byte_print($size), "\n";
    };
    $diskhogs{"$file"} = $size;
    $diskhogs{"$filedir"} += $size;
  }elsif (-d){
    print "Adding $file size ".&byte_print($size)."\n" if $debug;
    $diskhogs{"$file"} += $size;
  };
  if ($debug) {
    print "$file from $filedir has size ".&byte_print($diskhogs{"$file"})."\n";
  };
 };
 #
 # Reverse sort the keys by size.
 #
 my @sorted = sort {$diskhogs{$b} <=> $diskhogs{$a}} keys %diskhogs;
 splice @sorted, $opt_displaynum if @sorted > $opt_displaynum;
 warn "Found one or more instances of the stat() call statbug. This is normally only present on Solaris 8 with stock perl.\n" if $statbug;
 foreach (@sorted){
  printf "%-9s%s\n", &byte_print($diskhogs{$_}), $_;
 };
 if ($debug){
  print "DEBUG INFORMATION:\n";
  foreach (keys %diskhogs){
    printf "%-9s%s\n", &byte_print($diskhogs{$_}), $_;
  };
 };
 #+END_SRC
 ** ~/bin/ifinfo
 I don't remember now why I wrote this but its just a simpler view
 of interfaces on a system.
 Probably some old solaris holdover thing I can nuke.
 Example:
 $ ifinfo
 gif0@1280        127.0.0.1/8        a:b:c:d:e:f
 en1@1500         10.1.10.15/24      a:b:c:d:e:f
 bridge100@1500   192.168.64.1/24    a:b:c:d:e:f
 Comes in slightly handy, no guarantees it parses ifconfig right tho.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/ifinfo :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Because ifconfig output is... overly verbose.
 #
 # Output information from ifconfig -a like so:
 #   interface:mtu ipv4/cidr mac_address ipv6_addr(if applicable)
 #   ipv6 is not yet in place due to a: lazy, b: can't use it yet.
 #
 use strict;
 use Socket;
 use Sys::Hostname;
 $ENV{'PATH'}='/sbin:/usr/sbin:/bin:/usr/bin';
 my ($fqdn_regexp) = qr/([0-9,a-z,A-Z,\-,\_]+)\.([0-9,a-z,A-Z,\-,\_]+)\.(com|gov)/;
 #
 # converts a 1-word (4 byte) signed or unsigned integer into a dotted decimal
 # ip address.
 #
 sub int2ip {
  my $n=int(pop);
  return(sprintf("%d.%d.%d.%d", ($n>>24)&0xff,($n>>16)&0xff,
    ($n>>8)&0xff,$n&0xff));
 };
 #
 # Convert a host/ip/netmask/cidr/etc.... to a hash of information
 # Example: host.domain.tld/24 will get the ip and calculate the netmask info
 #  equally if host.domain.tld corresponds with 1.2.3.4 the following is valid
 #  1.2.3.4/255.255.255.0 would obtain the same information.
 #
 # die()'s if anything isn't kosher.
 #
 # Ultra long function, probably needs to be looked at for condensing/splitting.
 #
 sub cidr2raw {
  my $rawinput = pop;
  my ($lhs, $rhs, $j, $uip) = (undef, undef, undef, undef);
  my ($ucidr) = 0;
  my ($network, $bits, $netmask, $broadcast, $low, $high);
  if ($rawinput =~ qr/(.*)\/(.*)/){
      $lhs = $1; $rhs = $2;
  }else{
    die "Input: $rawinput not expected.\n";
  };
  #
  # Handle ip/hostname for left hand side.
  if ($lhs =~ qr/(\d+)\.(\d+)\.(\d+)\.(\d+)/){
    foreach my $dotted (($1,$2,$3,$4)){
      if (($dotted > 255) or ($dotted < 0)){
        die "FATAL: ipv4 address entered, $lhs entered is impossible, $dotted is not between 0-255.\n";
      };
    };
    $uip = "$1.$2.$3.$4";
  };
  #
  # Handle the netmask/cidr for the right hand side,
  #
  # All input netmasks are converted to a cidr address for notation
  if ($rhs =~ qr/^(\d+)$/){ # /cidr
    $ucidr = $1;
    die "FATAL: Invalid CIDR <$ucidr>.$!\n" if (($ucidr > 32) or ($ucidr < 0));
  }elsif ($rhs =~ qr/(0[xX])?([0-9,a-f,A-F]{7})/){ # /0xhexnetmask
    my $trimmed = $2;
    my $insane = 0;
    foreach my $byte (split('', unpack("B32", pack("H*", $trimmed)))){
      ($byte) ? $ucidr++ : $insane++;
      die "FATAL: $rhs is not a valid hex netmask.$!\n" if ($insane and $byte);
    };
  }elsif ($rhs =~ qr/(\d+)\.(\d+)\.(\d+)\.(\d+)/){ # /255.255.255.0 form
    my @a = ($1, $2, $3, $4);
    my $insane = 0;
    foreach my $t (@a){
      die "FATAL: Netmask out of range. Input <$rhs> Invalid <$t>$!\n" if (($t < 0) or ($t > 255));
    };
    foreach my $byte (split('', unpack("B32", pack("C4", @a)))){
      ($byte) ? $ucidr++ : $insane++;
      die "FATAL: $rhs is not a valid netmask.$!\n" if ($insane and $byte);
    };
  }else{
    die "FATAL: Unknown or invalid netmask value entered. <$rhs>\n";
  };
  #
  # Network math GO! This is the meat of the function.
  my (@uip) = split(/\./, $uip);
  $network = 0;
  for ($j = 0; $j <= $#uip; $j++){
    $network += int($uip[$j])<<((3-$j)*8);
  };
  $bits = 0; $j = 0;
  for ($j = 31 - $ucidr; $j >= 0; $j--){
    $bits |= 1<<$j;
  };
  $netmask = 0xffffffff^$bits;
  $low = ($network&$netmask);
  $high = ($network&$netmask)+$bits-1;
  $broadcast = ($network&$netmask)|$bits;
  #
  # Throw the info back, they get a hash with zie info they may/may not need.
  # All up to the caller what they want to use.
  #
  return ("inet4" => $uip,
          "netmask" => int2ip($netmask),
          "broadcast" => int2ip($broadcast),
          "cidr" => $ucidr,
          "router" => int2ip($low+1),
          "network" => int2ip($low),
          "high" => int2ip($high),
          );
 };
 my @ifout;
 if ($ENV{'TESTING'} ne '') {
    while(<>){
        chomp($_);
        last if ($_ eq '');
        push(@ifout, $_);
 #        sleep 1;
 #        print STDERR $_ . "\n";
    }
 }else{
    open IFCONFIG, "ifconfig -a |";
    @ifout = <IFCONFIG>;
    close IFCONFIG;
 }
 # This seems wrong but it makes parsing easier due to solaris
 # non root ifconfig not displaying the mac address. Reverse the output.
 #
@ifout = reverse(@ifout);
 my @output = ();
 my ($ifname, $ifether, $ifmtu, $ifipv4, $ifnetmask, $ifipv6) = (undef,undef,undef,undef,undef,undef);
 sub printiface{
  # assume a /32 if we don't know it
  unless (defined($ifnetmask)) {
    warn "$ifname has indeterminant netmask assuming /32\n";
    $ifnetmask = '32';
  }
  unless (defined($ifnetmask)) {
    $ifether = 'unknown';
  }
  unless ($ifname =~ m/lo.*/){
    my %netinfo = cidr2raw("$ifipv4\/$ifnetmask");
    $ifnetmask = $netinfo{"cidr"};
    $ifether = lc($ifether);
    my $line = sprintf "%-16s %-18s %-17s\n", "$ifname\@$ifmtu", "$ifipv4\/$ifnetmask", $ifether;
    push @output, $line;
  }
  # reset vars
  ($ifname, $ifether, $ifmtu, $ifipv4, $ifnetmask, $ifipv6) = (undef,undef,undef,undef,undef,undef);
 };
 foreach my $line (@ifout) {
  if ($line =~ /inet\s+(\d+[.]\d+[.]\d+[.]\d+)\s+/){
    $ifipv4 = $1;
  }
  if ($line =~ m/ether\s([:,0-9,a-f,A-F]{11,})/){
    $ifether =$1;
  }
  if ($line =~ m/^([\w,\:\d+]+)\s+.*HWaddr\s([:,0-9,a-f,A-F]{11,})/){
    $ifname = $1;
    $ifether = $2;
  }
  if ($line =~ m/^(.*)\:\s+.*mtu\s(\d+)/){
    $ifname = $1;
    $ifmtu = $2;
  }
  if ($line =~ m/MTU[:](\d+)/){
    $ifmtu = $1;
  }
  if ($line =~ m/inet\saddr\:(\d+[.]\d+[.]\d+[.]\d+)/){
    $ifipv4 = $1;
  }
  if ($line =~ m/netmask\s+(0[xX])?([a-f,A-F,0-9]{8})/){
    $ifnetmask = $2;
  }
  if ($line =~ m/Mask[:](\d+\.\d+\.\d+\.\d+)/){
    $ifnetmask = $1;
  }
  if ($line =~ m/netmask\s+(\d+[.]\d+[.]\d+[.]\d+)/){
    $ifnetmask = $1;
  }
  if ($line =~ m/netmask\s+0\s+broadcast/){
    $ifnetmask = '0';
  }
  print ":$ifether:$ifname:$ifmtu:$ifipv4:$ifnetmask:$ifipv6:\n" if ($ENV{'DEBUG'} ne '');
  printiface() if ($ifname and $ifmtu and $ifipv4 );
 };
 if (scalar(@output) < 1){
  warn "No interfaces? Scripts busted yo.\n";
 }else{
  foreach my $line (reverse(@output)){
    print $line;
  }
 }
 #+END_SRC
 ** ~/bin/iso8601
 Mostly because I use iso8601 timestamps and its nice to use them
 generally without depending on gnu date.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/iso8601 :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #-*-mode: Perl; coding: utf-8;-*-
 use strict;
 use warnings;
 use POSIX qw(strftime);
 my $now       = time;
 my $tz        = strftime(('%z', (localtime $now)));
 $tz =~ s/(\d{2})(\d{2})/$1:$2/smx;
 my $time = strftime('%Y-%m-%dT%H:%M:%S', (localtime $now));
 print "$time$tz\n";
 exit 0;
 #+END_SRC
 ** ~/bin/whoson
 Basically getent passwd $username/$uid to show who is on a system.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/whoson :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Because i'm lazy and sick of typing in getent passwd $someusername/uid
 #
 my %who_cmds = ("solaris", "/bin/who -q",
                "linux", "/usr/bin/who -q",
                "darwin", "/usr/bin/who -q",
               );
 my $who_cmd = $who_cmds{$^O};
 local %users = ();
 foreach my $l (qx/$who_cmd/){
  next if($l =~ m/^\#.*/);
  foreach my $user (split(/\s+/,$l)){
    unless(exists($users{$user})){
      $users{$user} = 0;
    }else{
      $users{$user}++;
    };
  };
 };
 foreach my $user (keys %users){
  my $gecos = ( getpwnam($user) )[6];
  my $count = $users{$user} + 1;
  my $output = "$user\, ".((defined($gecos)) ? "$gecos, " : '')."is logged in on $count tty".(($count>1) ? "\'s" : '')."\n";
  print $output;
 };
 #+END_SRC
 ** ~/bin/gecos
 Silly wrapper perl script that makes it easier to get at the gecos string for a $user/$uid.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/gecos :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Dumb wrapper to get the gecos information from a uid/username.
 foreach my $input (@ARGV){
  my $gecos = undef;
  my $uid = undef;
  my $name = undef;
  if ( $input =~ m/^\d+$/ ) {
    ( $name,$uid,$gecos ) = ( getpwuid($input) )[0,2,6];
  } else {
    ( $name,$uid,$gecos ) = ( getpwnam($input) )[0,2,6];
  }
  print "$name is '$gecos' uid '$uid'\n" if $gecos;
 }
 #+END_SRC
 ** ~/bin/hatimerun
 Stupid perl script to mimic hatimerun for systems that don't have it.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/hatimerun :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # hatimerun in perl, sorta
 #
 use Getopt::Long;
 my $opt_exitcode = 99;
 my $opt_killcode = 9;
 my $opt_timeout = 60;
 GetOptions( 'e=i' => \$opt_exitcode,
            'k=i' => \$opt_killcode,
            't=i' => \$opt_timeout,
            'h' => \&opt_help,
            'help' => \&opt_help,
 );
 sub opt_help{
  my $message = <<__END__;
 UX: ERROR: invalid syntax
 usage: [-e return code][-k kill signal][-t seconds to wait]
       [-h][--help]
  Options
      --help, -h     Prints this help text.
      -e             Exit code to return on timeout.
                     NOTE: 99 by default.
      -k             Signal number to send via kill.
                     NOTE: 9 by default.
      -t             Timeout in seconds before alarming.
                     NOTE: 60 by default.
 __END__
  print $message;
  exit 1;
 };
 my $pid;
 local $SIG{ALRM} = sub { kill $opt_killcode, $pid or die "Kill failed: $!";
                         die "Timeout!\n"};
 eval{
  my $x = defined($pid = fork());
  unless ($pid){
    print qx(@ARGV);
    die "Exec of ", join(' ', @ARGV), " failed at $!\n";
  };
  alarm $opt_timeout;
  waitpid $pid => 0;
  alarm 0;
  exit 0;
 };
 if ($@){
  die "Nothing to do!\n" unless $@ eq "Timeout!\n";
  exit $opt_exitcode;
 }else{
  exit 0;
 };
 #+END_SRC
 ** ~/bin/ptree.pl
 Silly perl based ptree alike implementation. Mad old code that should be avoided at all costs but it works and I'm not fixing it unless I need to.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/ptree.pl :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # ptree for linux/darwin/solaris. I got sick of ps and pstree on linux.
 # ptree works on solaris fine, but doesn't exist for darwin/linux/etc...
 #
 # TODO: Allow passing a regexp instead of a pid and passing multiple pids.
 #
 local $ENV{"PATH"} = '/bin:/usr/bin:/sbin:/usr/sbin';
 local $debug = 0;
 (exists($ENV{"DEBUG"})) ? $debug = 1 : undef;
 ($debug) ? local $| = 1 : undef; # disable buffering for STDERR and STDOUT
 sub debug_print {
  ($debug) && warn pop;
 };
 local @cmd = ('/bin/ps');
 local $init = 0;
 local $start = 1;
 if ($^O eq "linux"){
  push(@cmd, 'ajxSw');
  $start = 0;
 }elsif ($^O =~ m/darwin|freebsd/){
  push(@cmd, 'Ajwww');
 }elsif ($^O eq "solaris"){
  @cmd = ('/usr/ucb/ps');
  if ((-x "/bin/zonename") && !(qx(zonename) eq "global\n")){
    $init = qx(pgrep zsched);
    chomp($init);
    $start = $init;
  };
  push(@cmd, 'laxwww');
 }else{
  die "$^O isn't a known os to this script\n";
 };
 local @ps = qx(@cmd);
 ($?) ? die $cmd[0]." posix return code $?\n" : undef;
 local %proc;
 local @trail;
 (defined($ARGV[0])) ? $start = $ARGV[0] : undef;
 debug_print("Dump of raw line array data:\n");
 foreach my $x (@ps){
  my $cmd_index = 9;
  my $ppid = -1;
  my $pid = -1;
  next if ($x =~ m/.*PID.*/);
  my @line = split(m/\s+/,$x);
  splice(@line, 0, 1) unless ($line[0] =~ m/\d+/);
  splice(@line, 0, 1) if ("$line[0]" eq "");
  if ($^O eq "linux"){
    ($ppid,$pid) = @line;
    $cmd_index = 9;
  }elsif ($^O =~ m/darwin|freebsd/){
    ($pid,$ppid) = @line;
    $cmd_index = 8;
  }elsif ($^O eq "solaris"){
    (undef, undef, $pid,$ppid) = @line;
    for($x=$cmd_index; $x < 14; $x++){
      $cmd_index = ($line[$x] =~ m/\d+\:\d+/) ? ($x + 1) : $cmd_index;
    };
  };
  my $command = join(' ', @line[$cmd_index..$#line++]);
  (!defined $proc{$pid}) ? $proc{$pid}->{"children"} = [ ] : undef;
  (!defined $proc{$ppid}) ? $proc{$ppid}->{"children"} = [ ] : undef;
  $proc{$pid}->{"pid"} = $pid;
  $proc{$pid}->{"command"} = $command;
  $proc{$pid}->{"ppid"} = $ppid;
  push(@{$proc{$ppid}->{"children"}},$pid);
  debug_print(join(',', @line[0..($#line-1)])."\n");
 };
 if ($debug){
  debug_print("Done reading ps output\nDump of Hash\n");
  foreach my $key (sort({$a <=> $b} (keys %proc))){
    $ppid = $proc{$key}->{"ppid"};
    $command = $proc{$key}->{"command"};
    $children = join(',', @{$proc{$key}->{"children"}});
    debug_print("PID<$key> PPID<$ppid> Children<$children> Command<$command>\n");
  };
 };
 sub intrail{
  my $crumb = pop;
  my $ret = 0;
  map {$ret++ if ($crumb == $_)} @trail;
  return $ret;
 };
 sub addchildren{
  my $start_node = pop;
  foreach my $child (@{$proc{$start_node}->{"children"}}){
    next if (!defined($child) || ($start_node == $child));
    debug_print("Start ($start_node) Add child $child.\n");
    push(@trail, $child);
    addchildren($child);
  };
 };
 sub addparents{
  my $start_node = pop;
  my $parent = $proc{$start_node}->{"ppid"};
  return unless (defined($start_node));
  return if (($parent == $start_node) || !(defined($parent))); # At the top of the tree, or in a zone
  debug_print("Start ($start_node) Add parent $parent.\n");
  push(@trail, $parent);
  addparents($parent) if ($parent != $init);
 };
 sub printnode{
  my $start_node = pop;
  my $indent = pop;
  if (intrail($start_node)){
    my $pid = $proc{$start_node}->{"pid"};
    my $ppid = $proc{$start_node}->{"ppid"};
    my $cmdline = $proc{$start_node}->{"command"};
    my $indentation = '  'x($indent);
    if ($pid == $init){
      my $s = $^O." kernel";
      if ($cmdline ne ''){
        $s = $s." <$cmdline>";
      };
      $cmdline = $s;
    };
    printf("%s%d   %s\n", $indentation, $pid, $cmdline);
    foreach my $child (@{$proc{$start_node}->{"children"}}){
      next if ($pid == $child);
      printnode($indent+1,$child);
    };
  };
 };
 my $valid = 0;
 foreach my $j (keys %proc){ ($j == $start) ? $valid++ : undef; };
 debug_print("Starting from <$start>, validity is<$valid>\n");
 if ($valid){
  if (!$start){
    @trail = keys %proc;
    push(@trail, $start); push(@trail, 1);
    debug_print("Done with adding $start to trail.\n");
  }else{
    push(@trail, $start);
    debug_print("Adding children from $start.\n");
    addchildren($start);
    debug_print("Adding parents from $start.\n");
    addparents($start);
  };
  @trail = sort(@trail);
  debug_print("Trail is: ".join(',', @trail)."\nStarting at pid $start\ninit pid $init\n");
  print "PID COMMAND\n";
  my $startindent = 0;
  (intrail($startindent)) ? $startindent = -1 : undef;
  printnode($startindent,$init);
 }else{
  die "pid $start doesn't exist.\n";
 };
 exit 0;
 #+END_SRC
 * External Tanglers
 ** ~/bin/portchk
 Putting everything in readme.org was getting annoying. So started to split
 things apart. Org links to all the
 Just find out if a port responds to anything tcp related or not.
 #+BEGIN_SRC perl :mkdirp yes :tangle tmp/bin/portchk :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env perl
 #
 # Dumb wrapper to get the gecos information from a uid/username.
 | name     | file           |
 |----------+----------------|
 | emacs    | [[file:emacs.org][emacs.org]]      |
 | tmux     | [[file:tmux.org][tmux.org]]       |
 | git      | [[file:git.org][git.org]]        |
 | x        | [[file:x.org][x.org]]          |
 | nix      | [[file:nix.org][nix.org]]        |
 | zsh      | [[file:zsh.org][zsh.org]]        |
 | vim      | [[file:vim.org][vim.org]]        |
 | misc     | [[file:misc.org][misc.org]]       |
 | .profile | [[file:dotprofile.org][dotprofile.org]] |
 | ~/bin    | [[file:bin.org][bin.org]]        |
 foreach my $input (@ARGV){
  my $gecos = undef;
  my $uid = undef;
  my $name = undef;
  if ( $input =~ m/^\d+$/ ) {
    ( $name,$uid,$gecos ) = ( getpwuid($input) )[0,2,6];
  } else {
    ( $name,$uid,$gecos ) = ( getpwnam($input) )[0,2,6];
  }
  print "$name is '$gecos' uid '$uid'\n" if $gecos;
 }
 #+END_SRC
 ** ~/bin/notify
 OSX only really, just fires off a notification when its ran.
 Example:
 notify "some command" "not ok"
 First param is the message, second title of the notification.
 #+BEGIN_SRC sh :mkdirp yes :tangle (when (eq osx-p t) "tmp/bin/notify") :results replace :tangle-mode (identity #o755)
 #!/bin/sh
 message=${1:="no message"}
 title=''
 if [ "${2}" != "" ]; then
  message="${2}"
  title="${1}"
 fi
 notification="display notification \"${message}\""
 [ "${title}" != "" ] && notification="${notification} with title \"${title}\""
 osascript -e "${notification}"
 #+END_SRC
 ** ~/bin/today
 Stupid ruby script I wrote to highlight the week/day in a calendar.
 #+BEGIN_SRC ruby :mkdirp yes :tangle tmp/bin/today :results replace :tangle-mode (identity #o755)
 #!/usr/bin/env ruby
 cal, today, week_color, day_color, reset = %x(cal).split(%r(\n)), Time.now.day, %x(tput sgr0;tput setab 4;tput setaf 7), %x(tput sgr0; tput setab 0;tput setaf 7;tput bold), %x(tput sgr0)
 done=false
 cal.each do |line|
  if done then
    puts line
    next
  end
  if(line =~ /^(.*\s+?)#{today}(\s+?.*)$/ or
     line =~ /^(.*\s+?)#{today}$/ or
     line =~ /^()#{today}(\s+?.*)$/ or
     line =~ /^#{today}$/ ) then
    puts "#{week_color}#{$1}#{day_color}#{today}#{week_color}#{$2}#{reset}"
    done=true
  else
    puts line
  end
 end
 #+END_SRC
 ** Cray specific
 *** ~/bin/essh
 Expect ssh, to aide login to smw's etc..
 #+BEGIN_SRC expect :tangle (when (eq cray-p t) "tmp/bin/essh") :mkdirp yes :tangle-mode (identity #o755)
 #!/usr/bin/expect
 set prompt "> "
 set password [lindex $argv 1]
 set connstr [lindex $argv 0]
 if {$argc > 2} {
    eval spawn ssh -q $connstr "[lrange $argv 2 end]"
    set timeout 3600
    expect {
        timeout {
            puts "Command took too long"
            exit 1
        }
        "yes/no" {
            send "yes\r"
            exp_continue
        }
        "assword:" {
            send -- "$password\r"
            exp_continue
        }
    }
 } else {
    spawn ssh -q $connstr
    set timeout 5
    expect {
        timeout {
            puts "Connection timed out"
            exit 1
        }
        "yes/no" {
            send "yes\r"
            exp_continue
        }
        "assword:" {
            send -- "$password\r"
            exp_continue
        }
        "$prompt" {
            interact
        }
    }
 }
 #+END_SRC
 *** ~/bin/escp
 Similar to the above only for scp.
 #+BEGIN_SRC expect :tangle (when (eq cray-p t) "tmp/bin/escp") :mkdirp yes :tangle-mode (identity #o755)
 #!/usr/bin/expect
 set prompt "> "
 set password [lindex $argv 0]
 if {$argc > 2} {
    eval spawn scp -q "[lrange $argv 1 end]"
    set timeout 3600
    expect {
        timeout {
            puts "Command took too long"
            exit 1
        }
        "yes/no" {
            send "yes\r"
            exp_continue
        }
        "assword:" {
            send -- "$password\r"
            exp_continue
        }
    }
 }
 #+END_SRC
 *** ~/bin/flushdns
 For some reason this sometimes needs to happen, stupid work dns.
 #+BEGIN_SRC sh :tangle-mode (identity #o755) :tangle (when (and (eq cray-p t) (eq osx-p t)) "tmp/bin/flushdns") :mkdirp yes :tangle-mode (identity #o755)
 #!/bin/sh
 set +e
 dscacheutil -flushcache
 sudo killall -HUP mDNSResponder
 sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.mDNSResponder.plist
 sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.mDNSResponder.plist
 exit $?
 #+END_SRC
 *** ~/bin/tomod
 #+BEGIN_SRC sh :tangle (when (eq cray-p t) "tmp/bin/tomod") :mkdirp yes :tangle-mode (identity #o755)
 #!/usr/bin/env sh
 #-*-mode: Shell-script; coding: utf-8;-*-
 export script=$(basename "$0")
 export dir=$(cd "$(dirname "$0")"; pwd)
 export iam=${dir}/${script}
 remote=cfosbld01
 export PATH=/usr/local/brew/10.10/bin:~/bin:${PATH}
 branch=$(git rev-parse --abbrev-ref HEAD)
 if [ $? -ne 0 ]; then
  echo not on a branch or in a git repo
  exit 2
 fi
 base_git="$(pwd)"
 opwd="${base_git}"
 while true; do
  if [ -d ".git" ]; then
      base_git="$(pwd)"
      break
  fi
  if [ "$(pwd)" == "/" ]; then
      echo "No .git base directory found from ${opwd}"
      exit 2
  fi
  ((count=$count+1))
  cd ..
 done
 svn_url=$(git svn info --url)
 remote_svn="/notbackedup/users/mtishmack/mod_data/${branch}"
 ssh $remote "module load cpkg sdev craysvn; rm -fr ${remote_svn}; mkdir -p ${remote_svn} && svn co ${svn_url} ${remote_svn} > /dev/null 2>&1;"
 echo "rsyncing local git branch to ${remote}:${remote_svn}"
 rsync \
    --stats \
    --checksum \
    -avz \
    --hard-links \
    --exclude=.git \
    --delete-excluded \
    --delete \
    --filter="-rs_.svn" \
    --filter="-ss_covhtml" \
    --filter="-ss_dev.yml" \
    --filter="-ss_.gitignore" \
    --filter="-ss_*.log" \
    --filter="-ss_.\#*" \
    --filter="-ss_*.swp" \
    --filter="-ss_*.pyc" \
    --filter="-ss_venv" \
    --filter="-ss_testdirs" \
    --filter="-ss_testfiles" \
    --filter="-ss_.*.git.*" \
    --filter="-ss_*.o" \
    --filter="-ss_*.o.cmd" \
    --filter="-ss_*.ko" \
    --filter="-ss_*.ko.cmd" \
    --filter="-ss_*.tmp_versions" \
    "${base_git}/" "${remote}:${remote_svn}"
 echo "done rsyncing ${base_git} to ${remote}:${remote_svn}"
 #+END_SRC
 *** ~/bin/towip
 #+BEGIN_SRC sh :tangle (when (eq cray-p t) "tmp/bin/towip") :mkdirp yes :tangle-mode (identity #o755)
 #!/usr/bin/env sh
 #-*-mode: Shell-script; coding: utf-8;-*-
 export script=$(basename "$0")
 export dir=$(cd "$(dirname "$0")"; pwd)
 export iam=${dir}/${script}
 remote=cfosbld01
 export PATH=/usr/local/brew/10.10/bin:~/bin:${PATH}
 branch=$(git rev-parse --abbrev-ref HEAD)
 if [ $? -ne 0 ]; then
  echo not on a branch or in a git repo
  exit 2
 fi
 base_git="$(pwd)"
 opwd="${base_git}"
 while true; do
  if [ -d ".git" ]; then
      base_git="$(pwd)"
      break
  fi
  if [ "$(pwd)" == "/" ]; then
      echo "No .git base directory found from ${opwd}"
      exit 2
  fi
  ((count=$count+1))
  cd ..
 done
 svn_url=$(git svn info --url)
 remote_svn="/notbackedup/users/mtishmack/wip-dws"
 ssh $remote "module load cpkg sdev craysvn; rm -fr ${remote_svn}; mkdir -p ${remote_svn} && svn co ${svn_url} ${remote_svn} > /dev/null 2>&1;"
 echo "rsyncing local git branch to ${remote}:${remote_svn}"
 rsync \
    --progress \
    --checksum \
    -avz \
    --hard-links \
    --exclude=.git \
    --delete-excluded \
    --delete \
    --filter="-rs_.svn" \
    --filter="-ss_covhtml" \
    --filter="-ss_dev.yml" \
    --filter="-ss_.gitignore" \
    --filter="-ss_*.log" \
    --filter="-ss_.\#*" \
    --filter="-ss_*.swp" \
    --filter="-ss_*.pyc" \
    --filter="-ss_*.o" \
    --filter="-ss_*.o.cmd" \
    --filter="-ss_*.tmp_versions" \
    --filter="-ss_venv" \
    --filter="-ss_testdirs" \
    --filter="-ss_testfiles" \
    --filter="-ss_.*.git.*" \
    "${base_git}/" "${remote}:${remote_svn}"
 echo "done rsyncing ${base_git} to ${remote}:${remote_svn}"
 #+END_SRC
 * git
 ** ~/.gitconfig
 :PROPERTIES:
 :header-args: :tangle tmp/.gitconfig :comments no :padline no :cache yes :mkdirp yes
 :END:
 General git configuration.
 *** pager
 #+BEGIN_SRC conf
 [pager]
  color = true
 #+END_SRC
 *** color
 #+BEGIN_SRC conf
 [color]
  status = auto
  diff = auto
  branch = auto
 [color "status"]
  added = green
  changed = blue
  untracked = red
 [color "branch"]
  current = green
  local = blue
  remote = red
 [color "diff"]
  meta = blue bold
  frag = black reverse
  old = red reverse
  new = green reverse
 #+END_SRC
 *** alias
 #+BEGIN_SRC conf
  [alias]
    begin = !git init && git commit --allow-empty -m 'Initial empty commit'
    up = !git pull --rebase && git push
    wsdiff = diff --color-words --ignore-space-at-eol --ignore-space-change --ignore-all-space --ignore-all-space
    wdiff = diff --color-words
    ci = commit
    ciu = commit --all
    co = checkout
    ds = diff --stat
    ba = branch --all
    st = status --short --branch
    s = status --short --branch --untracked-files=no
    unstage = reset HEAD
    tlog = log --graph --color=always --abbrev-commit --date=relative --pretty=oneline
    hist = log --graph --pretty=format:'%Cred%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset' --abbrev-commit --date=relative
    slog = log --oneline --decorate
    fixup = commit --fixup
    squash = commit --squash
    ri = rebase --interactive --autosquash
    ra = rebase --abort
    effit = reset --hard
    # What commits differ between branches, note, equivalent commits are omitted.
    # Use this with three dot operator aka master...origin/master
    cpdiff = log --no-merges --left-right --graph --cherry-pick --oneline
    # Same as ^ only equivalent commits are listed with a = sign.
    cmdiff = log --no-merges --left-right --graph --cherry-mark --oneline
    # git update with submodule update
    sup = !git checkout master && git pull && git submodule update --init --recursive
    # git clone with submodules
    sc = !git clone --recursive $1
    # what files are getting updated a lot
    churn = !git log --all -M -C --name-only --format='format:' "$@" | sort | grep -v '^$' | uniq -c | sort | awk 'BEGIN {print "count,file"} {print $1 "," $2}'
    # help the gc a bit and get a bit more space back for a local clone
    trim = !git reflog expire --expire=now --all && git gc --prune=now
 #+END_SRC
 *** github
 #+BEGIN_SRC conf
 [github]
  user = mitchty
 #+END_SRC
 *** credential
 #+BEGIN_SRC conf
 [credential]
  helper = netrc -v -f ~/.netrc.gpg -f ~/.netrc
 #+END_SRC
 *** advice
 #+BEGIN_SRC conf
 [advice]
  statushints = false
 #+END_SRC
 *** gui
 #+BEGIN_SRC
 [gui]
  fontui = -family Monaco -size 8 -weight normal -slant roman -underline 0 -overstrike 0
  fontdiff = -family Monaco -size 8 -weight normal -slant roman -underline 0 -overstrike 0
 #+END_SRC
 *** http
 #+BEGIN_SRC
 [http]
  postBuffer = 209715200
 #+END_SRC
 *** push
 #+BEGIN_SRC conf
 [push]
  default = simple
 #+END_SRC
 *** url rewrites
 #+BEGIN_SRC conf
 [url "https://github.com/"]
  insteadOf = git://github.com/
 #+END_SRC
 *** username/email
 #+BEGIN_SRC conf
 [user]
  name = Mitch Tishmack
  email = mitch.tishmack@gmail.com
 #+END_SRC
 ** ~/.gitignore
 Common crap/build artifacts that git should always ignore.
 #+BEGIN_SRC conf :tangle tmp/.gitignore :results replace
 .*~
 *~
 .\#*
 \#*
 \#*\#
 .\#*\#
 .DS_Store
 *.pyc
 *.rbc
 *.elc
 *.swp
 *.[oa]
 *.hi
 #+END_SRC
 * x
 ** ~/.Xdefaults
 X defaults, just urxvt for the moment. Slightly linux/bsd only but not really.
 #+BEGIN_SRC conf :tangle (when (eq x-p t) "tmp/.Xdefaults") :results replace
 ! urxvt generalish stuff
 !
 urxvt*termName:                 rxvt-256color
 urxvt*font:                     xft:menlo:size=12:antialias=true
 urxvt*perl-ext-common:          default,matcher
 urxvt*jumpScroll:               true
 urxvt*cursorColor:              pink
 urxvt*loginShell:               true
 urxvt*scrollBar:                true
 urxvt*scrollstyle:              next
 urxvt*scrollBar_right:          true
 urxvt*scrollTtyOutput:          false
 urxvt*cursorBlink:              true
 urxvt*saveLines:                10000
 urxvt*urlLauncher:              /usr/bin/google-chrome
 urxvt*matcher.button:           1
 urxvt*allowWindowOps:           true
 #+END_SRC
 ** ~/.Xmodmap
 Swap around left/right clicks basically.
 #+BEGIN_SRC conf :tangle (when (and (eq x-p t) (not (eq osx-p t))) "tmp/.Xmodmap")
 pointer = 3 2 1 4 5
 #+END_SRC
 OSX is odd.
 #+BEGIN_SRC conf :tangle (when (and (eq x-p t) (eq osx-p t)) "tmp/.Xmodmap")
 pointer = 1 2 3 4 5
 #+END_SRC
 ** ~/.Xresources
 I can't remember why I did all this effort. But I'll remove it some year I bet.
 #+BEGIN_SRC conf :tangle (when (eq x-p t) "tmp/.Xresources") :results replace
 #define brightblack     #ffffff
 #define normblack       #f9f9f9
 #define normgreen       #00cc33
 #define brightgreen     #00cc99
 #define normblue        #f00033
 #define brightblue      #0099ff
 #define normcyan        #66ccff
 #define brightcyan      #66ccff
 #define normwhite       #060606
 #define brightwhite     #000000
 #define normyellow      #ffcc33
 #define brightyellow    #ffcc33
 #define normred         #ff3300
 #define brightred       #ff3300
 #define normmagenta     #ff66ff
 #define brightmagenta   #ff66ff
 *background:            normblack
 *foreground:            normwhite
 *fading:                40
 *fadeColor:             brightblack
 *cursorColor:           brightcyan
 *pointerColorBackground: #3f3f3f
 *pointerColorForeground: #f3f3f3
 *color0: #090909
 *color1: #f00000
 *color2: normgreen
 *color3: normyellow
 *color4: #0066ff
 *color5: normmagenta
 *color6: normcyan
 *color7: #c8c8c8
 *color8: #888888
 *color9: #f00033
 *color10: brightgreen
 *color11: brightyellow
 *color12: #0099ff
 *color13: brightmagenta
 *color14: brightcyan
 *color15: #f9f9f9
 #+END_SRC
 * zsh
 ** ~/.zprofile
 Make sure that zsh sources ~/.profile correctly on login.
 #+BEGIN_SRC sh :tangle tmp/.zprofile :results replace
 emulate sh
 source ~/.profile
 emulate zsh
 # zsh does this differently
 login_shell()
 {
  [[ -o login ]]
 }
 #+END_SRC
 ** ~/.zshrc
 Zsh configuration, its not too crazy... I think. Don't judge me.
 #+BEGIN_SRC sh :tangle tmp/.zshrc :results replace
 #-*-mode: Shell-script; coding: utf-8;-*-
 # zsh specific global aliases
 alias -g silent="> /dev/null 2>&1"
 alias -g noerr="2> /dev/null"
 alias -g stdboth="2>&1"
 # mainly for firefox, because it can suck up the cycles, but not when
 # in a SIGSTOP state you can't use any power then firefox.
 alias -g sigcont='kill -CONT '
 alias -g sigstop='kill -STOP '
 # Keybindings, what few there are.
 bindkey -v
 bindkey '^P' push-line # Saves the current line and returns to it afterwards.
 # General history options
 export HISTSIZE=5000
 export SAVEHIST=${HISTSIZE}
 export HISTFILE=~/.zsh_history
 # I like my options
 setopt append_history
 setopt extended_history
 setopt hist_reduce_blanks
 setopt hist_no_store
 setopt hist_ignore_dups
 setopt histignorespace
 setopt no_hist_beep
 setopt no_list_beep
 setopt share_history
 setopt inc_append_history
 setopt auto_menu
 setopt bash_auto_list
 # Options that don't need to be set.
 unsetopt bad_pattern # No, don't warn me on bad file patterns kthxbai.
 # The rest of the story (tm) (c) (r) in option settings.
 setopt equals
 setopt notify
 setopt auto_cd
 setopt glob_dots
 setopt print_exit_value # I love you zsh for this, print out non zero exits.
 other_term()
 {
  case $TERM in
  *xterm*|*rxvt*|(dt|k|e)term)
    print -Pn "\e]2;%~\a"
    ;;
  sun-cmd)
    print -Pn "\e]l%~\e\\"
    ;;
  *)
    ;;
  esac
 }
 chpwd()
 {
  [[ -o interactive ]] || return
  case $TERM in
  eterm-color) # getting emacs terminal to not be annoying... sucks
    print -Pn ""
    ;;
  *)
    if [[ $SSH_TTY != '' ]]; then
      case $ORIG_TERM in
      eterm-color)
        print -Pn ""
        ;;
      *)
        other_term
        ;;
      esac
    fi
    ;;
  esac
 }
 # Needs to be reviewed a bit.
 zstyle ':completion:*' squeeze-slashes true
 zstyle ':completion:*' list-colors ${(s.:.)LS_COLORS}
 zstyle ':completion:*:*:kill:*:processes' list-colors '=(#b) #([0-9]#)*=0=01;31'
 zstyle ':completion:*:*:*:*:processes' force-list always
 # No need to setup ssh known host parsing as root, just regular users.
 # This is pretty old using compctl, need to update eventually.
 Language specific
 if [[ "$LOGNAME" != "root" ]]; then
    zmodload zsh/mathfunc
    if [[ -f "$HOME/.ssh/known_hosts" ]]; then
        hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[0-9]*}%%\ *}%%,*})
        zstyle ':completion:*:(ssh|scp|cssh):*' hosts $hosts
        zstyle ':completion:*:*:*:hosts-host' ignored-patterns '|1|*' loopback localhost
    fi
    zstyle ':completion:::complete*' use-cache 1
    # This really should be closer to the definition of extract.
    compctl -g '*.tar.bz2 *.tbz2 *.tbz *.tar.gz *.tgz *.bz2 *.gz *.jar *.zip *.rar *.tar *.Z *.tZ *.tar.Z' + -g '*(-/)' extract
 fi
 # More history options for newer zsh versions
 setopt share_history
 setopt hist_save_no_dups
 setopt hist_find_no_dups
 setopt hist_no_functions
 setopt hist_expire_dups_first
 bindkey ' ' magic-space # Complete spaces too dammit, i'm lazy.
 alias edirs='ls -d **/*(/^F)' # empty directories
 zstyle ':completion:*:*:kill:*' menu yes select
 zstyle ':completion:*:kill:*' force-list always
 zstyle ':completion:*:kill:*:processes' command "ps x"
 zstyle ':completion:*' menu select=2
 autoload -U compinit
 autoload -U colors && colors
 autoload -Uz vcs_info
 bindkey -e
 local userat="%{$fg[blue]%}%n%(!.%{$fg[red]%}.%{$fg[blue]%})%{$reset_color%}%B@%b%{$fg[blue]%}%m%b"
 local pwd="%B%~%b"
 local userchar="%(!.#.$)"
 zstyle ':vcs_info:*' enable git
 zstyle ':vcs_info:*' check-for-changes true
 setopt prompt_subst
 precmd()
 {
    vcs_info
 }
 # +N/-N upstream info
 function +vi-git-st() {
    local ahead behind
    local -a gitstatus
    ahead=$(git rev-list ${hook_com[branch]}@{upstream}..HEAD 2>/dev/null | wc -l | sed -e 's|^ *||g')
    behind=$(git rev-list HEAD..${hook_com[branch]}@{upstream} 2>/dev/null | wc -l | sed -e 's|^ *||g')
    (( $ahead )) && gitstatus+=( "+${ahead}" )
    (( $behind )) && gitstatus+=( "-${behind}" )
    hook_com[misc]+=${(j:/:)gitstatus}
 }
 # Untracked crap in the repo not covered by .gitignore?
 function +vi-git-untracked(){
    if [[ $(git rev-parse --is-inside-work-tree 2> /dev/null) == 'true' ]] && \
        git status --porcelain | grep '??' &> /dev/null ; then
        hook_com[staged]+="%{$fg[red]%}N"
    fi
 }
 local branch="%{$fg[green]%}%b%c%u%{$fg[green]%}%{$reset_color%}"
 zstyle ':vcs_info:*' formats "%m $branch"
 zstyle ':vcs_info:*' actionformats "%a $branch"
 zstyle ':vcs_info:*' stagedstr "%{$fg[blue]%}S"
 zstyle ':vcs_info:*' unstagedstr "%{$fg[blue]%}M"
 zstyle ':vcs_info:git*+set-message:*' hooks git-untracked git-st
 PROMPT="%(!.#.$) " # $ as a user # as root
 RPROMPT='${vcs_info_msg_0_} ${PWD/#$HOME/~}'
 #+END_SRC
 * tmux
 ** ~/.tmux.conf
 Tmux configuration. Pretty boring in most ways.
 #+BEGIN_SRC conf :tangle tmp/.tmux.conf
 # Setup utf8 by default and vi mode
 set-window-option -g utf8 on
 set-window-option -g mode-keys vi
 set-window-option -g aggressive-resize on
 # Force zsh to be a login shell
 set-option -g default-command 'zsh -l'
 set-option -g default-terminal 'xterm-256color'
 # Status line options, mainly coloring
 set-window-option -g window-status-bg colour6
 set-window-option -g window-status-fg black
 set-window-option -g window-status-current-bg white
 # Status line options
 set-option -g status-bg black
 set-option -g status-fg colour7
 set-option -g status-left-length 24
 set-option -g status-left ''
 set-option -g status-right-length 13
 set-option -g status-right "%a %H:%M:%S"
 set-option -g status-interval 7
 set-option -g status-utf8 on
 # Pane border options, mimics the status line coloring
 set-option -g pane-border-bg colour15
 set-option -g pane-border-fg colour82
 set-option -g pane-active-border-bg colour15
 set-option -g pane-active-border-fg colour2
 # Alert related things
 set-option -g visual-activity on
 set-option -g visual-bell on
 set-option -g message-bg colour7
 set-option -g message-fg black
 # Pass through the window title and display it automatically on changes.
 set-option -g set-titles on
 set-option -g set-titles-string '#T'
 set-window-option -g automatic-rename on
 # Key rebinding to make things more au naturalle
 bind-key R \
  source-file ~/.tmux.conf \;\
  display 'reloaded tmux config'
 # Log pane output to a file, save with an iso8601 datestamp
 bind-key o \
  pipe-pane -o "cat >> $HOME/tmux-`iso8601`.log" \;\
  set-window-option window-status-current-fg green \;
 bind-key O \
  pipe-pane \;\
  set-window-option window-status-current-fg default \;
 bind-key N new-session -t default
 # Using s for synchronizing panes, means that s for choosing sessions
 # is now e
 unbind-key s # interactive select sessions
 bind-key e choose-tree
 # (un)synchronize panes with prefix-s
 bind-key s \
  if-shell \
    "tmux show-window-options | grep 'synchronize-panes on'" \
      "set-window-option window-status-current-bg colour7; \
      set-window-option pane-active-border-fg colour2; \
      set-window-option pane-active-border-bg colour15; \
      set-window-option synchronize-panes off; \
      display 'synchronization off'" \
      "set-window-option window-status-current-bg red; \
      set-window-option pane-active-border-fg red; \
      set-window-option pane-active-border-bg colour15; \
      set-window-option synchronize-panes on; \
      display 'synchronizing'"
 # same thing as ^ so it sets up things if we were started with
 # something else that set synchronization.
 if-shell \
  "tmux show-window-options | grep 'synchronize-panes on' || /bin/true" \
  "set-window-option window-status-current-bg red; \
  set-window-option pane-active-border-fg yellow; \
  set-window-option pane-active-border-bg red"
 # Setup splits to be less annoying
 bind-key \ split-window -h
 bind-key - split-window -v
 # vi keybindings for pane navigation
 bind-key k select-pane -U
 bind-key j select-pane -D
 bind-key h select-pane -L
 bind-key l select-pane -R
 # Make it so that I can detach/etc while holding control down,
 # PURE LAZY
 bind-key C-d detach
 bind-key C-n next-window
 bind-key C-p previous-window
 bind-key C-k select-pane -U
 bind-key C-j select-pane -D
 bind-key C-h select-pane -L
 bind-key C-l select-pane -R
 # Non confirming kill pane plskthxbai
 bind-key x kill-pane
 # In case something I run exits straight away, i'd like to know about it.
 set-option -g set-remain-on-exit on
 # Lets change the prefix key so we don't clobber emacs back one char key
 unbind-key C-b
 # hacky, but C-\ isn't used by anything overly important in emacs
 set-option -g prefix 'C-\'
 # two C-\'s == C-\, if i need it, likely not
 bind 'C-\' send-prefix
 # Delay in sending things is dumb
 set-option -s escape-time 1
 # so we can scroll the mouse, select panes, etc...
 set -g mouse on
 bind -n WheelUpPane if-shell -F -t = "#{mouse_any_flag}" "send-keys -M" "if -Ft= '#{pane_in_mode}' 'send-keys -M' 'copy-mode -e'"
 bind-key m \
  if-shell \
    "tmux show-options -g | grep 'mouse on'" \
      "set -g mouse off; \
       display 'Mouse modes off'" \
      "set -g mouse on; \
      display 'Mouse modes on'"
 #+END_SRC
 #+BEGIN_SRC  conf :tangle (when (not (eq osx-p t)) "tmp/.tmux.conf")
 # Assume linux for things, load osx stuff only on osx
 bind C-p run "tmux set-buffer \"$(xclip -o)\"; tmux paste-buffer"
 bind C-y run "tmux save-buffer - | xclip -i"
 #+END_SRC
 * vim
 ** ~/.vimrc
 What remains of my days from being a vim user.
 #+BEGIN_SRC conf :tangle tmp/.vimrc :results replace
 set nocompatible
 set backspace=indent,eol,start
 set history=50 " keep 50 lines of command line history
 set ruler " show the cursor position all the time
 set showcmd " display incomplete commands
 set incsearch " do incremental searching
 map Q gq
 if &t_Co > 2 || has("gui_running")
  syntax on
  set hlsearch
 endif
 if has("autocmd")
  filetype plugin indent on
  augroup vimrcEx
  au!
  autocmd FileType text setlocal textwidth=78
  autocmd BufReadPost *
    \ if line("'\"") > 0 && line("'\"") <= line("$") |
    \   exe "normal g`\"" |
    \ endif
  augroup END
 else
  set autoindent " always set autoindenting on
 endif " has("autocmd")
 #+END_SRC
 * nix
 #+BEGIN_SRC conf :mkdirp yes :tangle (when (eq nix-p t) "tmp/.nixpkgs/config.nix")
 {pkgs}: {
  allowUnfree = true;
  allowBroken = true;
  packageOverrides = pkgs: with pkgs; {
    pinentry = pkgs.pinentry.override {
      gtk2 = null;
      qt4 = null;
      ncurses = null;
    };
    gnupg = pkgs.gnupg.override {
      x11Support = false;
      pinentry = true;
    };
    youtube-dl = pkgs.youtube-dl.override {
      pandoc = null;
    };
    # haskellPackages = haskellPackages.override {
    #   extension = self : super : {
    #     cabal = pkgs.haskellPackages.cabalNoTest;
    #   };
    # };
    default = with pkgs; buildEnv {
      name = "default";
      paths = [
        ansible
        ack
        aria
        iperf
        cacert
        curl
        clang
        clang-analyzer
        diffutils
        patchutils
        gitAndTools.gitFull
        gitAndTools.git-extras
        bazaarTools
        mercurial
        subversionClient
        gist
        mercurial
        docbook5
        entr
        emacs
        gnupg1compat
        gnutar
        gnumake
        sloccount
        cloc
        less
        multitail
        rlwrap
        gdbm
        mosh
        htop
        imagemagick
        keychain
        silver-searcher
        aspell
        aspellDicts.en
        openssl
        pinentry
        pbzip2
        pigz
        pv
        postgresql
        readline
        rsync
        sqlite
        texLiveFull
        tmux
        tree
        wget
        wakelan
        unzip
        upx
        xz
        multimarkdown
        jq
 #        rtags broken again on osx, fix it
        p7zip
        unrar
        watch
        nox
        mutt
        duply
        zsh
        pylint
        python27Packages.howdoi
        python27Packages.youtube-dl
        python27Packages.pyflakes
        python27Packages.flake8
        python27Packages.virtualenv
        python27Packages.pip
 #        xhyve        compiles normally, figure out hypervisor framework issue
 #        lastpass-cli no worky on osx TODO fix this it works on homebrew
      ];
    };
    env_hs =
      pkgs.haskell.packages.ghc7103.ghcWithPackages
          (haskellPackages: with haskellPackages; [
              alex
              happy
              bake
              cabal-dependency-licenses
              cabal-install
              cabal-meta
              ghc-core
              ghc-mod
              hasktags
              hindent
              hoogle
              hspec
 #              idris # zlib is complaining for some reason, hmmm
              pandoc
              shake
              ShellCheck
              stack
              stylish-haskell
              nats
              transformers-compat
              ]
          );
  };
 }
 #+END_SRC
 * Language related
 ** Haskell
 *** ~/.ghci
 Ghci setup, mostly just cosmetics.
 #+BEGIN_SRC haskell :tangle tmp/.ghci :results replace
 :l ~/.ghc.hs
 :set prompt "λ "
 :set +t
 #+END_SRC
 *** ~/.ghc.hs
 What to automatically have loaded into ghci sessions.
 #+BEGIN_SRC haskell :tangle tmp/.ghc.hs :results replace
 import Control.Applicative
 import Control.Monad
 import Data.Monoid
 import Data.Maybe
 import Data.List
 import Data.Bool
 import qualified Data.Set as S
 import qualified Data.Map as M
 #+END_SRC
 ** Perl
 *** ~/.perlcriticrc
 What to complain about by default.
 #+BEGIN_SRC conf :tangle tmp/.perlcritirc :results replace
 # Show the severity level
 severity = 1
 # Basically show what profile is complaining
 verbose = %f:%l:%c: %m, %e (%p, severity %s)\n
 # Don't warn on these variables
 [Variables::ProhibitPunctuationVars]
 allow = $@ $!
 # Ignore syscall returns on print, it not actually returning is... whatever.
 [InputOutput::RequireCheckedSyscalls]
 exclude_functions = print say
 # Allow things like print qx(somecmd) in a void context to work, this is ok.
 [InputOutput::ProhibitBacktickOperators]
 only_in_void_context = 1
 # I actually like using unless... so don't piss me off whinging about it
 [-ControlStructures::ProhibitUnlessBlocks]
 # The following only apply to modules
 [-Modules::RequireVersionVar]
 [-ErrorHandling::RequireCarping]
 # Tabs suck, no
 [CodeLayout::ProhibitHardTabs]
 allow_leading_tabs = 0
 # For small regexes, no /x at the end is fine, 12 should be enough
 [RegularExpressions::RequireExtendedFormatting]
 minimum_regex_length_to_complain_about = 12
 # These are kosher kthxbai
 [ControlStructures::ProhibitPostfixControls]
 allow = for if until unless
 # For POE, we do things like my $foo = $_[HEAP]; and thats OK
 [Subroutines::RequireArgUnpacking]
 allow_subscripts = 1
 # For POD documentation, I don't care about required sections.
 [Documentation::RequirePodSections]
 lib_sections = NAME | SYNOPSIS | DESCRIPTION | AUTHOR | COPYRIGHT | SEE ALSO
 script_sections = NAME | SYNOPSIS | DESCRIPTION | AUTHOR | COPYRIGHT | SEE ALSO
 # This is for POD documentation mainly.
 [CodeLayout::ProhibitHardTabs]
 allow_leading_tabs = 1
 #+END_SRC
 *** ~/.perltidyrc
 Control how perltidy should clean things up.
 #+BEGIN_SRC conf :tangle tmp/.perltidyrc :results replace
 # cuddled elses pls
 -ce
 # indent 2 spaces
 -i=2
 # for tokens with things like arrays, start the data next line down one indent in
 -lp
 # align closing tokens for things like arrays with the opening token
 -cti=1
 # default, but spaces between multiple entries, none with one arg
 -pt=1
 # line encoding
 -ole=unix
 # braces not on new line
 -nsbl
 # stack opening tokens, don't create a new line with one token, note no stacking of closing tokens
 -sot
 # no space before ;'s in for loops
 -nsfs
 # Make curly braces act more like the args param
 -bbt=1
 # Trim qw whitespaces
 -tqw
 #+END_SRC
 * Misc
 Stuff that logically doesn't fit elsewhere or in any other category.
 ** ~/.dir_colors
 For BSD ps, make colors closer to what the GNU utilities produce by default.
 #+BEGIN_SRC conf :tangle tmp/.dir_colors :results replace
 COLOR tty
 TERM ansi
 TERM color-xterm
 TERM con132x25
 TERM con132x30
 TERM con132x43
 TERM con132x60
 TERM con80x25
 TERM con80x28
 TERM con80x30
 TERM con80x43
 TERM con80x50
 TERM con80x60
 TERM cons25
 TERM console
 TERM cygwin
 TERM dtterm
 TERM eterm-color
 TERM Eterm
 TERM gnome
 TERM konsole
 TERM kterm
 TERM linux
 TERM linux-c
 TERM mach-color
 TERM putty
 TERM rxvt
 TERM rxvt-cygwin
 TERM rxvt-cygwin-native
 TERM rxvt-unicode
 TERM screen
 TERM screen-bce
 TERM screen-w
 TERM screen.linux
 TERM vt100
 TERM xterm
 TERM xterm-256color
 TERM xterm-color
 TERM xterm-debian
 # Below are the color init strings for the basic file types. A color init
 # string consists of one or more of the following numeric codes:
 # Attribute codes:
 # 00=none 01=bold 04=underscore 05=blink 07=reverse 08=concealed
 # Text color codes:
 # 30=black 31=red 32=green 33=yellow 34=blue 35=magenta 36=cyan 37=white
 # Background color codes:
 # 40=black 41=red 42=green 43=yellow 44=blue 45=magenta 46=cyan 47=white
 NORMAL 00           # global default, although everything should be something.
 FILE 00             # normal file
 DIR 01;34           # directory
 LINK 01;36          # symbolic link.  (If you set this to 'target' instead of a
                    # numerical value, the color will match the file pointed to)
 FIFO 40;33          # pipe
 SOCK 01;35          # socket
 DOOR 01;35          # door
 BLK 40;33;01        # block device driver
 CHR 40;33;01        # character device driver
 ORPHAN 01;05;37;41  # orphaned syminks
 MISSING 01;05;37;41 # ... and the files they point to
 # This is for files with execute permission:
 EXEC 01;32
 # List any file extensions like '.gz' or '.tar' that you would like ls
 # to colorize below. Put the extension, a space, and the color init string.
 # (and any comments you want to add after a '#')
 .cmd 01;32 # executables (bright green)
 .exe 01;32
 .com 01;32
 .btm 01;32
 .bat 01;32
 .sh  01;32
 .csh 01;32
 .ksh 01;32
 .zsh 01;32
 .tar 01;31 # archives / compressed (bright red)
 .tgz 01;31
 .arj 01;31
 .taz 01;31
 .lzh 01;31
 .zip 01;31
 .z   01;31
 .Z   01;31
 .gz  01;31
 .bz2 01;31
 .bz  01;31
 .tbz2 01;31
 .tz  01;31
 .deb 01;31
 .rpm 01;31
 .rar 01;31 # app-arch/rar
 .ace 01;31 # app-arch/unace
 .zoo 01;31 # app-arch/zoo
 .cpio 01;31 # app-arch/cpio
 .7z  01;31 # app-arch/p7zip
 .rz  01;31 # app-arch/rzip
 #+END_SRC
 ** ~/.hushlogin
 Because who gives a rats when and where I last logged on from?
 #+BEGIN_SRC conf :tangle tmp/.hushlogin :results replace
 #+END_SRC
 | name    | file        |
 |---------+-------------|
 | haskell | [[file:haskell.org][haskell.org]] |
 | perl    | [[file:perl.org][perl.org]]    |
 * TODO
 - [ ] Figure out some way to make code blocks editable with :tangle, it sucks not being able to edit blocks as they are.
 - [ ] Need to have some way to autocleanup old generations. Rm works for now so meh.
 - [ ] Need to add the ability to detect that make is generating a pointless new generation. Aka generation N and generation N-1 are the same, just leave N and don't increment.
 - [ ] Maybe checksum file contents somehow and use that?
 - [ ] More? For now its functional.
 * Reference for babel stuff
--- a/tangle.el
+++ b/tangle.el
@@ -0,0 +1,22 @@
 ;;-*-mode: emacs-lisp; coding: utf-8;-*-
 ;; File: tangle.el
 ;; Load the default options used or what was passed in as OPTIONS
 (defun load-defaults-or-options ()
    (load-file (if (getenv "OPTIONS")
                   (concat (concat "./" (getenv "OPTIONS")) ".el")
                 "./defaults.el")))
 ;; Define functions we use in :tangle blocks
 ;; tangle/yn
 ;; tangle to "yes" or "no" if the predicate given exists and defined as t.
 ;;
 ;; Iff predicate is bound, and t, "yes"
 ;; rest is "no"
 (defun tangle/yn (p) (load-defaults-or-options) (if (bound-and-true-p p) "yes" "no"))
 ;; tangle/file
 ;; tangle to filename if predicate is bound and t
 ;; Note, prepends tmp/ to the filename to conform to match expected layout
 (defun tangle/file (p file) (load-defaults-or-options) (if (bound-and-true-p p) (concat "tmp/" file) "no"))
--- a/tmux.org
+++ b/tmux.org
@@ -0,0 +1,152 @@
 #+TITLE: Tmux Configuration
 #+AUTHOR: Mitch Tishmack
 #+STARTUP: hidestars
 #+STARTUP: odd
 #+BABEL: :cache yes
 #+PROPERTY: header-args :cache yes :padline no :mkdirp yes :comments no
 Tmux configuration. Pretty boring in most ways.
 #+BEGIN_SRC conf :tangle (tangle/file tmux-p ".tmux.conf")
  # Setup utf8 by default and vi mode
  set-window-option -g utf8 on
  set-window-option -g mode-keys vi
  set-window-option -g aggressive-resize on
  # Force zsh to be a login shell
  set-option -g default-command 'zsh -l'
  set-option -g default-terminal 'xterm-256color'
  # Status line options, mainly coloring
  set-window-option -g window-status-bg colour6
  set-window-option -g window-status-fg black
  set-window-option -g window-status-current-bg white
  # Status line options
  set-option -g status-bg black
  set-option -g status-fg colour7
  set-option -g status-left-length 24
  set-option -g status-left ''
  set-option -g status-right-length 13
  set-option -g status-right "%a %H:%M:%S"
  set-option -g status-interval 7
  set-option -g status-utf8 on
  # Pane border options, mimics the status line coloring
  set-option -g pane-border-bg colour15
  set-option -g pane-border-fg colour82
  set-option -g pane-active-border-bg colour15
  set-option -g pane-active-border-fg colour2
  # Alert related things
  set-option -g visual-activity on
  set-option -g visual-bell on
  set-option -g message-bg colour7
  set-option -g message-fg black
  # Pass through the window title and display it automatically on changes.
  set-option -g set-titles on
  set-option -g set-titles-string '#T'
  set-window-option -g automatic-rename on
  # Key rebinding to make things more au naturalle
  bind-key R \
    source-file ~/.tmux.conf \;\
    display 'reloaded tmux config'
  # Log pane output to a file, save with an iso8601 datestamp
  bind-key o \
    pipe-pane -o "cat >> $HOME/tmux-`iso8601`.log" \;\
    set-window-option window-status-current-fg green \;
  bind-key O \
    pipe-pane \;\
    set-window-option window-status-current-fg default \;
  bind-key N new-session -t default
  # Using s for synchronizing panes, means that s for choosing sessions
  # is now e
  unbind-key s # interactive select sessions
  bind-key e choose-tree
  # (un)synchronize panes with prefix-s
  bind-key s \
    if-shell \
      "tmux show-window-options | grep 'synchronize-panes on'" \
        "set-window-option window-status-current-bg colour7; \
        set-window-option pane-active-border-fg colour2; \
        set-window-option pane-active-border-bg colour15; \
        set-window-option synchronize-panes off; \
        display 'synchronization off'" \
        "set-window-option window-status-current-bg red; \
        set-window-option pane-active-border-fg red; \
        set-window-option pane-active-border-bg colour15; \
        set-window-option synchronize-panes on; \
        display 'synchronizing'"
  # same thing as ^ so it sets up things if we were started with
  # something else that set synchronization.
  if-shell \
    "tmux show-window-options | grep 'synchronize-panes on' || /bin/true" \
    "set-window-option window-status-current-bg red; \
    set-window-option pane-active-border-fg yellow; \
    set-window-option pane-active-border-bg red"
  # Setup splits to be less annoying
  bind-key \ split-window -h
  bind-key - split-window -v
  # vi keybindings for pane navigation
  bind-key k select-pane -U
  bind-key j select-pane -D
  bind-key h select-pane -L
  bind-key l select-pane -R
  # Make it so that I can detach/etc while holding control down,
  # PURE LAZY
  bind-key C-d detach
  bind-key C-n next-window
  bind-key C-p previous-window
  bind-key C-k select-pane -U
  bind-key C-j select-pane -D
  bind-key C-h select-pane -L
  bind-key C-l select-pane -R
  # Non confirming kill pane plskthxbai
  bind-key x kill-pane
  # In case something I run exits straight away, i'd like to know about it.
  set-option -g set-remain-on-exit on
  # Lets change the prefix key so we don't clobber emacs back one char key
  unbind-key C-b
  # hacky, but C-\ isn't used by anything overly important in emacs
  set-option -g prefix 'C-\'
  # two C-\'s == C-\, if i need it, likely not
  bind 'C-\' send-prefix
  # Delay in sending things is dumb
  set-option -s escape-time 1
  # so we can scroll the mouse, select panes, etc...
  set -g mouse on
  bind -n WheelUpPane if-shell -F -t = "#{mouse_any_flag}" "send-keys -M" "if -Ft= '#{pane_in_mode}' 'send-keys -M' 'copy-mode -e'"
  bind-key m \
    if-shell \
      "tmux show-options -g | grep 'mouse on'" \
        "set -g mouse off; \
         display 'Mouse modes off'" \
        "set -g mouse on; \
        display 'Mouse modes on'"
 #+END_SRC
 Only set xclip for x setup.
 #+BEGIN_SRC conf :tangle (eq (tangle/file tmux-p ".tmux.conf") (tangle/file x-p ".tmux.conf"))
  bind C-p run "tmux set-buffer \"$(xclip -o)\"; tmux paste-buffer"
  bind C-y run "tmux save-buffer - | xclip -i"
 #+END_SRC
--- a/vim.org
+++ b/vim.org
@@ -0,0 +1,36 @@
 #+TITLE: Vim Configuration
 #+AUTHOR: Mitch Tishmack
 #+STARTUP: hidestars
 #+STARTUP: odd
 #+BABEL: :cache yes
 #+PROPERTY: header-args :cache yes :padline no :mkdirp yes :comments no :tangle tmp/.vimrc
 What remains of my days from being a vim user.
 #+BEGIN_SRC conf :tangle tmp/.vimrc :results replace
 set nocompatible
 set backspace=indent,eol,start
 set history=50 " keep 50 lines of command line history
 set ruler " show the cursor position all the time
 set showcmd " display incomplete commands
 set incsearch " do incremental searching
 map Q gq
 if &t_Co > 2 || has("gui_running")
  syntax on
  set hlsearch
 endif
 if has("autocmd")
  filetype plugin indent on
  augroup vimrcEx
  au!
  autocmd FileType text setlocal textwidth=78
  autocmd BufReadPost *
    \ if line("'\"") > 0 && line("'\"") <= line("$") |
    \   exe "normal g`\"" |
    \ endif
  augroup END
 else
  set autoindent " always set autoindenting on
 endif " has("autocmd")
 #+END_SRC
--- a/x.org
+++ b/x.org
@@ -0,0 +1,103 @@
 #+TITLE: X Configuration
 #+AUTHOR: Mitch Tishmack
 #+STARTUP: hidestars
 #+STARTUP: odd
 #+BABEL: :cache yes
 #+PROPERTY: header-args :cache yes :padline no :mkdirp yes :comments no
 X related configuration, nothing overly huge to be honest just stupid configuration.
 * ~/.Xdefaults
 :PROPERTIES:
 :header-args: :tangle (when (eq x-p t) "tmp/.Xdefaults") :comments no :padline no :cache yes :mkdirp yes
 :END:
 X defaults, just urxvt for the moment. Slightly linux/bsd only but not really.
 #+BEGIN_SRC conf
 ! urxvt generalish stuff
 !
 urxvt*termName:                 rxvt-256color
 urxvt*font:                     xft:menlo:size=12:antialias=true
 urxvt*perl-ext-common:          default,matcher
 urxvt*jumpScroll:               true
 urxvt*cursorColor:              pink
 urxvt*loginShell:               true
 urxvt*scrollBar:                true
 urxvt*scrollstyle:              next
 urxvt*scrollBar_right:          true
 urxvt*scrollTtyOutput:          false
 urxvt*cursorBlink:              true
 urxvt*saveLines:                10000
 urxvt*urlLauncher:              /usr/bin/google-chrome
 urxvt*matcher.button:           1
 urxvt*allowWindowOps:           true
 #+END_SRC
 * ~/.Xmodmap
 :PROPERTIES:
 :header-args: :tangle (when (eq x-p t) "tmp/.Xmodmap") :comments no :padline no :cache yes :mkdirp yes
 :END:
 Swap around left/right clicks basically.
 #+BEGIN_SRC conf :tangle (when (not (and (eq x-p t) (eq osx-p t))) "tmp/.Xmodmap")
 pointer = 3 2 1 4 5
 #+END_SRC
 OSX is odd/inverted cause reasons (who cares why).
 #+BEGIN_SRC conf :tangle (when (and (eq x-p t) (eq osx-p t)) "tmp/.Xmodmap")
 pointer = 1 2 3 4 5
 #+END_SRC
 * ~/.Xresources
 :PROPERTIES:
 :header-args: :tangle (when (eq x-p t) "tmp/.Xresources") :comments no :padline no :cache yes :mkdirp yes
 :END:
 I can't remember why I did all this effort. But I'll remove it some year I bet.
 #+BEGIN_SRC conf
 #define brightblack     #ffffff
 #define normblack       #f9f9f9
 #define normgreen       #00cc33
 #define brightgreen     #00cc99
 #define normblue        #f00033
 #define brightblue      #0099ff
 #define normcyan        #66ccff
 #define brightcyan      #66ccff
 #define normwhite       #060606
 #define brightwhite     #000000
 #define normyellow      #ffcc33
 #define brightyellow    #ffcc33
 #define normred         #ff3300
 #define brightred       #ff3300
 #define normmagenta     #ff66ff
 #define brightmagenta   #ff66ff
 *background:            normblack
 *foreground:            normwhite
 *fading:                40
 *fadeColor:             brightblack
 *cursorColor:           brightcyan
 *pointerColorBackground: #3f3f3f
 *pointerColorForeground: #f3f3f3
 *color0: #090909
 *color1: #f00000
 *color2: normgreen
 *color3: normyellow
 *color4: #0066ff
 *color5: normmagenta
 *color6: normcyan
 *color7: #c8c8c8
 *color8: #888888
 *color9: #f00033
 *color10: brightgreen
 *color11: brightyellow
 *color12: #0099ff
 *color13: brightmagenta
 *color14: brightcyan
 *color15: #f9f9f9
 #+END_SRC
--- a/zsh.org
+++ b/zsh.org
@@ -0,0 +1,197 @@
 #+TITLE: Zsh Configuration
 #+AUTHOR: Mitch Tishmack
 #+STARTUP: hidestars
 #+STARTUP: odd
 #+BABEL: :cache yes
 #+PROPERTY: header-args :cache yes :padline no :mkdirp yes :comments no
 ~/.zshrc and ~/.zprofile setup. Nothing too special.
 * ~/.zprofile
 Make sure that zsh sources ~/.profile correctly on login.
 #+BEGIN_SRC sh :tangle tmp/.zprofile :results replace
 emulate sh
 source ~/.profile
 emulate zsh
 # zsh does this differently
 login_shell()
 {
  [[ -o login ]]
 }
 #+END_SRC
 * ~/.zshrc
 Zsh configuration, its not too crazy... I think. Don't judge me.
 #+BEGIN_SRC sh :tangle tmp/.zshrc :results replace
 #-*-mode: Shell-script; coding: utf-8;-*-
 # zsh specific global aliases
 alias -g silent="> /dev/null 2>&1"
 alias -g noerr="2> /dev/null"
 alias -g stdboth="2>&1"
 # mainly for firefox, because it can suck up the cycles, but not when
 # in a SIGSTOP state you can't use any power then firefox.
 alias -g sigcont='kill -CONT '
 alias -g sigstop='kill -STOP '
 # Keybindings, what few there are.
 bindkey -v
 bindkey '^P' push-line # Saves the current line and returns to it afterwards.
 # General history options
 export HISTSIZE=5000
 export SAVEHIST=${HISTSIZE}
 export HISTFILE=~/.zsh_history
 # I like my options
 setopt append_history
 setopt extended_history
 setopt hist_reduce_blanks
 setopt hist_no_store
 setopt hist_ignore_dups
 setopt histignorespace
 setopt no_hist_beep
 setopt no_list_beep
 setopt share_history
 setopt inc_append_history
 setopt auto_menu
 setopt bash_auto_list
 # Options that don't need to be set.
 unsetopt bad_pattern # No, don't warn me on bad file patterns kthxbai.
 # The rest of the story (tm) (c) (r) in option settings.
 setopt equals
 setopt notify
 setopt auto_cd
 setopt glob_dots
 setopt print_exit_value # I love you zsh for this, print out non zero exits.
 other_term()
 {
  case $TERM in
  *xterm*|*rxvt*|(dt|k|e)term)
    print -Pn "\e]2;%~\a"
    ;;
  sun-cmd)
    print -Pn "\e]l%~\e\\"
    ;;
  *)
    ;;
  esac
 }
 chpwd()
 {
  [[ -o interactive ]] || return
  case $TERM in
  eterm-color) # getting emacs terminal to not be annoying... sucks
    print -Pn ""
    ;;
  *)
    if [[ $SSH_TTY != '' ]]; then
      case $ORIG_TERM in
      eterm-color)
        print -Pn ""
        ;;
      *)
        other_term
        ;;
      esac
    fi
    ;;
  esac
 }
 # Needs to be reviewed a bit.
 zstyle ':completion:*' squeeze-slashes true
 zstyle ':completion:*' list-colors ${(s.:.)LS_COLORS}
 zstyle ':completion:*:*:kill:*:processes' list-colors '=(#b) #([0-9]#)*=0=01;31'
 zstyle ':completion:*:*:*:*:processes' force-list always
 # No need to setup ssh known host parsing as root, just regular users.
 # This is pretty old using compctl, need to update eventually.
 if [[ "$LOGNAME" != "root" ]]; then
    zmodload zsh/mathfunc
    if [[ -f "$HOME/.ssh/known_hosts" ]]; then
        hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[0-9]*}%%\ *}%%,*})
        zstyle ':completion:*:(ssh|scp|cssh):*' hosts $hosts
        zstyle ':completion:*:*:*:hosts-host' ignored-patterns '|1|*' loopback localhost
    fi
    zstyle ':completion:::complete*' use-cache 1
    # This really should be closer to the definition of extract.
    compctl -g '*.tar.bz2 *.tbz2 *.tbz *.tar.gz *.tgz *.bz2 *.gz *.jar *.zip *.rar *.tar *.Z *.tZ *.tar.Z' + -g '*(-/)' extract
 fi
 # More history options for newer zsh versions
 setopt share_history
 setopt hist_save_no_dups
 setopt hist_find_no_dups
 setopt hist_no_functions
 setopt hist_expire_dups_first
 bindkey ' ' magic-space # Complete spaces too dammit, i'm lazy.
 alias edirs='ls -d **/*(/^F)' # empty directories
 zstyle ':completion:*:*:kill:*' menu yes select
 zstyle ':completion:*:kill:*' force-list always
 zstyle ':completion:*:kill:*:processes' command "ps x"
 zstyle ':completion:*' menu select=2
 autoload -U compinit
 autoload -U colors && colors
 autoload -Uz vcs_info
 bindkey -e
 local userat="%{$fg[blue]%}%n%(!.%{$fg[red]%}.%{$fg[blue]%})%{$reset_color%}%B@%b%{$fg[blue]%}%m%b"
 local pwd="%B%~%b"
 local userchar="%(!.#.$)"
 zstyle ':vcs_info:*' enable git
 zstyle ':vcs_info:*' check-for-changes true
 setopt prompt_subst
 precmd()
 {
    vcs_info
 }
 # +N/-N upstream info
 function +vi-git-st() {
    local ahead behind
    local -a gitstatus
    ahead=$(git rev-list ${hook_com[branch]}@{upstream}..HEAD 2>/dev/null | wc -l | sed -e 's|^ *||g')
    behind=$(git rev-list HEAD..${hook_com[branch]}@{upstream} 2>/dev/null | wc -l | sed -e 's|^ *||g')
    (( $ahead )) && gitstatus+=( "+${ahead}" )
    (( $behind )) && gitstatus+=( "-${behind}" )
    hook_com[misc]+=${(j:/:)gitstatus}
 }
 # Untracked crap in the repo not covered by .gitignore?
 function +vi-git-untracked(){
    if [[ $(git rev-parse --is-inside-work-tree 2> /dev/null) == 'true' ]] && \
        git status --porcelain | grep '??' &> /dev/null ; then
        hook_com[staged]+="%{$fg[red]%}N"
    fi
 }
 local branch="%{$fg[green]%}%b%c%u%{$fg[green]%}%{$reset_color%}"
 zstyle ':vcs_info:*' formats "%m $branch"
 zstyle ':vcs_info:*' actionformats "%a $branch"
 zstyle ':vcs_info:*' stagedstr "%{$fg[blue]%}S"
 zstyle ':vcs_info:*' unstagedstr "%{$fg[blue]%}M"
 zstyle ':vcs_info:git*+set-message:*' hooks git-untracked git-st
 PROMPT="%(!.#.$) " # $ as a user # as root
 RPROMPT='${vcs_info_msg_0_} ${PWD/#$HOME/~}'
 #+END_SRC